1uz Timing Help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Turb · 08-12-2016, 04:58 PM

Okay so I am currently swapping a 1uz into my S-chasiss and I someone had done the timing belt before I put the motor in the car, and once I finally got the car running It ran terrible, So I checked the timing and its way off.

SO... My question is which orientation should the cams be facing when the cams are at TDC?
I know I know you line the cams up with the marks but, since the cams turn 180 degrees wouldn't there be 2 orientations of the cam lopes at the marks?

Keep in mind this is a 1uz v8 quad cam.

THANKS.

08-12-2016, 04:58 PM	#1
Turb Leaky Injector Join Date: Jun 2015 Location: Arizona Age: 28 Posts: 88 Trader Rating: (0) Feedback Score: 0 reviews	1uz Timing Help Okay so I am currently swapping a 1uz into my S-chasiss and I someone had done the timing belt before I put the motor in the car, and once I finally got the car running It ran terrible, So I checked the timing and its way off. SO... My question is which orientation should the cams be facing when the cams are at TDC? I know I know you line the cams up with the marks but, since the cams turn 180 degrees wouldn't there be 2 orientations of the cam lopes at the marks? Keep in mind this is a 1uz v8 quad cam. THANKS.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode