FYI: You be the judge

[HaLo]

Well, I went with cheap parts. I am sorry.

I just recently bought the SS Autochrome Generation II SS Manifold and the turbo elbow. I took some pics to show you what I think about the product.

The manifold seems quite nice. Actually, I am impressed with the improvements they put on it. Since most of them were cracking because of turbo weight with vibration, they tried their best to reinforce their current design.

Manifold:
www.apaspeed.com/oktay/manifold/IMG_0344.JPG
www.apaspeed.com/oktay/manifold/IMG_0346.JPG
www.apaspeed.com/oktay/manifold/IMG_0347.JPG


Notice on this picture how EACH runner as a small reinforcement? Might not do much, but it's better than nothing.
www.apaspeed.com/oktay/manifold/IMG_0345.JPG


Another piece of reinforcement at the runner junction:
www.apaspeed.com/oktay/manifold/IMG_0350.JPG

This is the best part: an included bracket to reduce vibration...
www.apaspeed.com/oktay/manifold/IMG_0351.JPG
www.apaspeed.com/oktay/manifold/IMG_0352.JPG


Now let's talk about the elbow. Very nice design, 2 different runners: one for wastegate and one for the exhaust. That's to reduce turbulence...

Now let's diss on that part because that one is FAR from perfect. First of all, I had to HAMMER the bolt under the wastegate runner because there was not enough space to fit it in... And second, the freakin' thing touches the steering column. Now, I should have expected this from such a cheap (price-wise) part. I might bang that runner to make it clear my column. What do you think?


Elbow:
www.apaspeed.com/oktay/manifold/IMG_0337.JPG
www.apaspeed.com/oktay/manifold/IMG_0340.JPG
www.apaspeed.com/oktay/manifold/IMG_0342.JPG
www.apaspeed.com/oktay/manifold/IMG_0343.JPG


Please take in mind that both part cost me a huge 243$ shipped to my place. It's not expensive... And if it crackes.. At least it won't have cost me a lot.