Help identification for tranny swap (Pics) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tak- · 01-01-2005, 05:51 PM

(images may or may not load, the host is a shithole)

I am in the process of swapping my '89 Automatic tranny to a '91 5Spd.

When I removed the auto tranny, I was left with these wires / sensors:

The last two, "C" and "D" came out the following holes. The wires for "C" were cut, because there was no way to disconnect or detach them.

I have asked some people, and most have said that the DOHC tranny has 1 more sensor (4th gear). From looking at the automatic transmission(above) and comparing them to the 5 speed(below) I am a bit confused. I have alot more wires on the 5 speed.

Can someone please help me identify what each of these are.
#1

#2

#3

#4

#5

And a shot of the whole thing:

If you can help shed some light on this situation it would be greatly appreciated. I need to know what the automatic sensors are, and what the manual ones are. What ones I dont need to use, and what ones I do.

And what is that orange tube?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-01-2005, 05:51 PM	#1
tak- Zilvia Member Join Date: Mar 2004 Location: Tampa, FL Age: 40 Posts: 153 Trader Rating: (0) Feedback Score: 0 reviews	Help identification for tranny swap (Pics) (images may or may not load, the host is a shithole) I am in the process of swapping my '89 Automatic tranny to a '91 5Spd. When I removed the auto tranny, I was left with these wires / sensors: The last two, "C" and "D" came out the following holes. The wires for "C" were cut, because there was no way to disconnect or detach them. I have asked some people, and most have said that the DOHC tranny has 1 more sensor (4th gear). From looking at the automatic transmission(above) and comparing them to the 5 speed(below) I am a bit confused. I have alot more wires on the 5 speed. Can someone please help me identify what each of these are. #1 #2 #3 #4 #5 And a shot of the whole thing: If you can help shed some light on this situation it would be greatly appreciated. I need to know what the automatic sensors are, and what the manual ones are. What ones I dont need to use, and what ones I do. And what is that orange tube?