Air leak around my intake manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RedlineRacer · 01-20-2005, 10:45 AM

I've got a small air leak somewhere around my intake manifold. I can't put my finger on it, but I can hear it when it is idling, and it has a horrible idle. If if sits at idle long enough it will cut off. I've had the problem for a long time, and I realized one of my vacuum hoses was shot on my EGR. So I removed the whole EGR and capped it off. And capped of the hoses for it. But, the problem was still there and now it is getting worse. Please help if you can. Thanks.

RedlineRacer · 01-21-2005, 11:45 AM

any help?......

fastpace · 01-21-2005, 01:09 PM

sounds like you still have a vacuum leak somewhere. I would suggest looking all over the engine bay for more vacuum leaks or you can go to this site: http://www.vfaq.com/mods/ICtester.html and make a homemade leak tester to better pen point the problem.

sr240mike · 01-21-2005, 04:03 PM

Or just spray carb cleaner around the area and when the idle rises you know you've found your leak.

01-20-2005, 10:45 AM	#1
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	Air leak around my intake manifold I've got a small air leak somewhere around my intake manifold. I can't put my finger on it, but I can hear it when it is idling, and it has a horrible idle. If if sits at idle long enough it will cut off. I've had the problem for a long time, and I realized one of my vacuum hoses was shot on my EGR. So I removed the whole EGR and capped it off. And capped of the hoses for it. But, the problem was still there and now it is getting worse. Please help if you can. Thanks.

01-21-2005, 01:09 PM	#3
fastpace Zilvia Addict Join Date: Jul 2001 Location: Houston, TX Age: 43 Posts: 689 Trader Rating: (0) Rides Gallery: fastpace Feedback Score: 0 reviews	sounds like you still have a vacuum leak somewhere. I would suggest looking all over the engine bay for more vacuum leaks or you can go to this site: http://www.vfaq.com/mods/ICtester.html and make a homemade leak tester to better pen point the problem. __________________ life is what you make of it!!!! "well, I go out, I do the practice, I think about it and I concentrate on one small thing I can change that will have an effect. I make that change then I go out and drive to my maximum." -Ayrton Senna

01-21-2005, 04:03 PM	#4
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	Or just spray carb cleaner around the area and when the idle rises you know you've found your leak. __________________ TWO IN THE COOT, ONE IN THE POOT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2005, 11:45 AM	#2
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	any help?......