j30 vlsd swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ernpob · 08-03-2004, 02:25 PM

I hope you guys can help me. I am doing a j30 vlsd swap for my 95 240sx non-abs. I understand that I will have to shorten my 240sx driveshaft if i want to play it safe, but could I use a j30 driveshaft instead. And dose anyone know a place I could get an aluminum driveshaft for this.
Thanks

kandyflip445 · 08-03-2004, 02:59 PM

I was pretty sure you only needed output shafts not a driveshaft.

yellow_jacket · 08-03-2004, 03:21 PM

The nose on the J30 pumpkin is just a little bigger. It really is not a big deal though because the pumpkin does not move on these cars. You will get some movement from the mounts, but nothing like an old solid axle car. Just test fit your driveshaft.

As far as aluminum, any competant driveline service can make you one.

HATchTRICK · 08-03-2004, 03:38 PM

No Problems at all. I just did thissam exact thing a few weeks ago. 95 non-abs 240 with 95+ j30 lsd. No problems at ll just simplyboltit in. The driveshaft was not a issue at all. I believe the length diference's are with the ABS equipped 240's.

Good luck... tok me 1.5 ours complete!!! Very EASY

TheTimanator · 08-03-2004, 04:49 PM

Quote:

Originally Posted by HATchTRICK

No Problems at all. I just did thissam exact thing a few weeks ago. 95 non-abs 240 with 95+ j30 lsd. No problems at ll just simplyboltit in. The driveshaft was not a issue at all. I believe the length diference's are with the ABS equipped 240's.

Good luck... tok me 1.5 ours complete!!! Very EASY

The J30 VLSD (just like other R200 diffs that have abs) has an abs sensor ring. J30's, S13's, S14's (maybe some others) that are equpied with ABS have driveshafts that are .5" shorter than non-abs. Many people have done it using a non-abs drive shaft. It's just a tighter squezze with the abs sensor on the diff. I'll be putting one in a non-abs S13 soon.

kandyflip445- no output shafts needed with the J30 VLSD

skatanic28 · 08-03-2004, 05:42 PM

i think you do need output shafts for certain years. i believe 95 and 96 both have the 6 bolt.

TokyoNights · 08-03-2004, 07:18 PM

95+ is a direct bolt in, no axels/output shafts/driveshafts needed. My s14 is a non abs car and I never had a problem with the j30 diff.

TheTimanator · 08-03-2004, 10:05 PM

Quote:

Originally Posted by mikespeed

95+ is a direct bolt in, no axels/output shafts/driveshafts needed. My s14 is a non abs car and I never had a problem with the j30 diff.

crap, I forgot about it being 95+ bolt-in. Pre 95 require output shafts.
Thanks for clearing up my partial misinfo!

kandyflip445 · 08-03-2004, 10:37 PM

Yeah, sorry about my misinformation too. I've only looked into putting one into mine and I require them. :P

TheTimanator · 08-03-2004, 10:46 PM

Quote:

Originally Posted by kandyflip445

Yeah, sorry about my misinformation too. I've only looked into putting one into mine and I require them. :P

did you get a pre 95 J30 VLSD? Mine is a 95 bolts into S13's and S14's no need for output shafts. just gotta get longer bolts and (i'm still unsure of this) some kind of washers...

stinky_180 · 08-03-2004, 10:49 PM

search button is your friend
google.com is your best friend....

http://www.ka24development.com/vlsd.html

kandyflip445 · 08-03-2004, 10:52 PM

What I looked up was the z32 diff in the 91' non-abs.

CHARLIE2020 · 02-07-2005, 03:35 PM

So a 96 J30 VLSD w/ABS will swap right into a S13 coupe w/o ABS..........I can still use the S13 non-ABS driveshaft?.................or should I get the J30 VLSD w/ABS driveshaft?

mbmbmb23 · 02-07-2005, 11:31 PM

Quote:

Originally Posted by CHARLIE2020

So a 96 J30 VLSD w/ABS will swap right into a S13 coupe w/o ABS..........I can still use the S13 non-ABS driveshaft?.................or should I get the J30 VLSD w/ABS driveshaft?

Just use your S13 driveshaft, ABS or not...both work. You WILL need the longer carrier bolts from infiniti and the insulating washers that fit between the head of the carrier bolt and the diff. and the rubber spacer/washers that fit between the top of the diff and the car. If you want to do it right....hit up the infiniti parts department. Make sure they DONT order you the late 96-97 upper washer/spacer, it has the bushing and washer/spacer as one peice and is very expensive, so get the 95 peice. The carrier bolts have the same part numbers but the washers have a different thickness "crown" of rubber around them, so they are 2 different part numbers and you need one of each (the diff torques a certain direction so one of the "crowns" is thicker than the other one).

Hope that helps.

-M

CHARLIE2020 · 02-07-2005, 03:47 PM

Also will the J30 5lug rear hub/spindle assembly bolt right up to the S13?

CHARLIE2020 · 02-08-2005, 01:24 AM

Thanks alot^^^^ I will get my feet wet soon and know exactly what u r speaking about but I have and idea....thanks for teh 411.

08-03-2004, 02:25 PM	#1
ernpob Leaky Injector Join Date: Nov 2003 Location: LA Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	j30 vlsd swap I hope you guys can help me. I am doing a j30 vlsd swap for my 95 240sx non-abs. I understand that I will have to shorten my 240sx driveshaft if i want to play it safe, but could I use a j30 driveshaft instead. And dose anyone know a place I could get an aluminum driveshaft for this. Thanks __________________ http://www.zilvia.net/f/showthread.php?t=21036

08-03-2004, 02:59 PM	#2
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 40 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	I was pretty sure you only needed output shafts not a driveshaft. __________________ My 240 vBgarage

08-03-2004, 10:37 PM	#9
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 40 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	Yeah, sorry about my misinformation too. I've only looked into putting one into mine and I require them. :P __________________ My 240 vBgarage

08-03-2004, 10:49 PM	#11
stinky_180 Nissanaholic! Join Date: May 2004 Location: Pale Blue Dot Age: 40 Posts: 2,064 Trader Rating: (26) Feedback Score: 26 reviews	search button is your friend google.com is your best friend.... http://www.ka24development.com/vlsd.html __________________ SoCal RallyX Coverage and MTB Ride Reports WheelsDirty

08-03-2004, 10:52 PM	#12
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 40 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	What I looked up was the z32 diff in the 91' non-abs. __________________ My 240 vBgarage

08-03-2004, 03:21 PM	#3
yellow_jacket Leaky Injector Join Date: May 2003 Location: GA Age: 47 Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	The nose on the J30 pumpkin is just a little bigger. It really is not a big deal though because the pumpkin does not move on these cars. You will get some movement from the mounts, but nothing like an old solid axle car. Just test fit your driveshaft. As far as aluminum, any competant driveline service can make you one.

08-03-2004, 03:38 PM	#4
HATchTRICK Zilvia Member Join Date: Mar 2004 Location: New Jersey Posts: 218 Trader Rating: (0) Feedback Score: 0 reviews	No Problems at all. I just did thissam exact thing a few weeks ago. 95 non-abs 240 with 95+ j30 lsd. No problems at ll just simplyboltit in. The driveshaft was not a issue at all. I believe the length diference's are with the ABS equipped 240's. Good luck... tok me 1.5 ours complete!!! Very EASY

08-03-2004, 05:42 PM	#6
skatanic28 Zilvia Junkie Join Date: Oct 2002 Location: ny Age: 41 Posts: 443 Trader Rating: (0) Feedback Score: 0 reviews	i think you do need output shafts for certain years. i believe 95 and 96 both have the 6 bolt.

08-03-2004, 07:18 PM	#7
TokyoNights Zilvia FREAK! Join Date: Dec 2002 Location: garage Age: 42 Posts: 1,215 Trader Rating: (2) Rides Gallery: TokyoNights Feedback Score: 2 reviews	95+ is a direct bolt in, no axels/output shafts/driveshafts needed. My s14 is a non abs car and I never had a problem with the j30 diff.

02-07-2005, 03:35 PM	#13
CHARLIE2020 Zilvia Addict Join Date: Jan 2005 Location: Socal Fontana Age: 48 Posts: 784 Trader Rating: (0) Feedback Score: 0 reviews	So a 96 J30 VLSD w/ABS will swap right into a S13 coupe w/o ABS..........I can still use the S13 non-ABS driveshaft?.................or should I get the J30 VLSD w/ABS driveshaft?

02-07-2005, 03:47 PM	#15
CHARLIE2020 Zilvia Addict Join Date: Jan 2005 Location: Socal Fontana Age: 48 Posts: 784 Trader Rating: (0) Feedback Score: 0 reviews	Also will the J30 5lug rear hub/spindle assembly bolt right up to the S13?

02-08-2005, 01:24 AM	#16
CHARLIE2020 Zilvia Addict Join Date: Jan 2005 Location: Socal Fontana Age: 48 Posts: 784 Trader Rating: (0) Feedback Score: 0 reviews	Thanks alot^^^^ I will get my feet wet soon and know exactly what u r speaking about but I have and idea....thanks for teh 411.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode