Throttle cable not lining up - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sr20tom · 03-01-2005, 12:10 PM

on my 90 240sx the cable lined up with the sr motor using the jdm bracket. Now that i totaled that one, i got a 91 and the throttle cable is not lining up for some reason. Are there any suggestions on how to fix this problem?

Flybert · 03-01-2005, 01:12 PM

Make your own extension bracket.

a2low240 · 03-02-2005, 08:57 AM

Bend the gas pedal to allow for more slack on the motor side. Make sure that there is no stress on the TB when the car is floored or you will break it and send screws into your manifold / engine.

g2ic02 · 03-02-2005, 10:05 AM

i would just bend the bracket that holds the throtle cable....you probably dont' want to mess with bending your pedal. if you want i can send you pictures if you email me. [email protected]

timmybgood · 03-02-2005, 11:00 AM

seems like the gas pedal would be pretty hard to bend..

i had the same problem when i put mine in. with the SR bracket the throttle cable was close but wouldn't reach the TB. so i put on the bracket from the KA and with a little bending it fit perfect

03-01-2005, 12:10 PM	#1
sr20tom Leaky Injector Join Date: Dec 2004 Location: Queens Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	Throttle cable not lining up on my 90 240sx the cable lined up with the sr motor using the jdm bracket. Now that i totaled that one, i got a 91 and the throttle cable is not lining up for some reason. Are there any suggestions on how to fix this problem?

03-02-2005, 08:57 AM	#3
a2low240 Leaky Injector Join Date: Aug 2003 Location: Downingtown Pa Age: 45 Posts: 113 Trader Rating: (0) Feedback Score: 0 reviews	Bend the gas pedal to allow for more slack on the motor side. Make sure that there is no stress on the TB when the car is floored or you will break it and send screws into your manifold / engine. __________________ Signature Exceeds Forum Limits

03-02-2005, 11:00 AM	#5
timmybgood Zilvia Member Join Date: Mar 2003 Location: central ohio Age: 41 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	seems like the gas pedal would be pretty hard to bend.. i had the same problem when i put mine in. with the SR bracket the throttle cable was close but wouldn't reach the TB. so i put on the bracket from the KA and with a little bending it fit perfect __________________ 1995 SE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-01-2005, 01:12 PM	#2
Flybert Post Whore! Join Date: Mar 2003 Location: none Posts: 3,862 Trader Rating: (7) Feedback Score: 7 reviews	Make your own extension bracket.

03-02-2005, 10:05 AM	#4
g2ic02 Zilvia Junkie Join Date: Jul 2003 Location: minnesota Posts: 480 Trader Rating: (3) Feedback Score: 3 reviews	i would just bend the bracket that holds the throtle cable....you probably dont' want to mess with bending your pedal. if you want i can send you pictures if you email me. [email protected]