Brake Pad Suggestion - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drivenlegend · 04-21-2005, 10:55 PM

I know that there has been some other posts on this subject, but I couldn't find anything that suited my exact purposes....

I have a 98 240 Non ABS with 30mm Aluminum Z32 front calipers, stock rears. I have the 1 1/16 MC, but I plan to just use my stock one because it is an Auto MC, and I am only doing the fronts. I am about to redo the brake system and put everything on, but I need suggestions on which pads to buy. My car is a daily driver with VERY OCCASIONAL track use (Like once ever so far). I would prefer to have pads that don't wear too fast, don't dust too much, and don't squeak.

I have seen people recommending Hawk, Project Mu, EBC Greenstuff, Axxis Ceramic, etc..... Just looking for opinions from anyone who has been there.

Nate

04-21-2005, 10:55 PM	#1
drivenlegend Zilvia Member Join Date: Jan 2004 Location: Tulsa, OK Posts: 231 Trader Rating: (0) Feedback Score: 0 reviews	Brake Pad Suggestion I know that there has been some other posts on this subject, but I couldn't find anything that suited my exact purposes.... I have a 98 240 Non ABS with 30mm Aluminum Z32 front calipers, stock rears. I have the 1 1/16 MC, but I plan to just use my stock one because it is an Auto MC, and I am only doing the fronts. I am about to redo the brake system and put everything on, but I need suggestions on which pads to buy. My car is a daily driver with VERY OCCASIONAL track use (Like once ever so far). I would prefer to have pads that don't wear too fast, don't dust too much, and don't squeak. I have seen people recommending Hawk, Project Mu, EBC Greenstuff, Axxis Ceramic, etc..... Just looking for opinions from anyone who has been there. Nate

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode