r32 dash fit in s13??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ryno · 04-25-2005, 07:23 PM

I currently have no dash and have access to a skyline r32 dash from jarco. Does anybody know if will fit or atleast fit with little modification. If nobody knows then I guess I will give it a try this weekend. All the dashes from sr frontclips around here are beat to hell and the r32 dash is in good condition so that's why I am asking. Don't worry the car is already rhd.

Ryno

JDMs13 · 04-25-2005, 07:30 PM

pheeeew....I was starting to get worried for a second there.

SR240DET · 04-25-2005, 07:42 PM

welp.. guess that means your gonna have to take out the measure tape and compaire with the sr dash boards..

wootwoot · 04-25-2005, 07:45 PM

Quote:

Originally Posted by SR240DET

welp.. guess that means your gonna have to take out the measure tape and compaire with the sr dash boards..

and you get a cookie of your choice

Ryno · 04-25-2005, 08:00 PM

As you can see, I need a dash.

MakotoS13 · 04-25-2005, 08:14 PM

ya know, finding a dash would be easier if you had the steering wheel on the right side.

BoroBoroS13 · 04-25-2005, 08:32 PM

He has a rb26 makoto... turbos wont clear lhd steering crap.

Ryno · 04-25-2005, 08:40 PM

Quote:

Originally Posted by MakotoS13

ya know, finding a dash would be easier if you had the steering wheel on the right side.

I know, it also be easier going in the drive thru at Wendy's but it's too late now.

BoroBoroS13 · 04-25-2005, 08:43 PM

So do u rev in? lol

**ThatGuy** · 04-25-2005, 08:47 PM

Quote:

Originally Posted by Ryno

I know, it also be easier going in the drive thru at Wendy's but it's too late now.

Just back the car through.

I think your best bet had already been stated, break out the tape measure and compare it in person. Unless someone here has done it before and can give you first hand experience, I think that's your only option. I know a S15 dash will work with some tweaking, I've seen pics, but not sure about R32.

This is the car.

This is the interior.

SilviaDriver · 04-25-2005, 09:16 PM

Quote:

Originally Posted by BoroBoroS13

He has a rb26 makoto... turbos wont clear lhd steering crap.

then what does mckinney mounts are used for?

BoroBoroS13 · 04-25-2005, 09:34 PM

Hes not using them :P

This is snails old car... if your wondering why I know so much about it. lol

chris4130 · 04-25-2005, 09:48 PM

I have a *decent s13 rhd dash. It's got a crack or 2 in it.. nothing too major. I just used my best one on a rhd conversion i did. Let me know if you want it, also.. I'll be picking up a front clip this weekend that may or may not have a good dash. e-mail me if your interested: [email protected]

Ryno · 04-26-2005, 09:20 AM

I'll give it a try to see if fits this weekend. Hopefully no major modifications wil be needed to make it fit but I'll let you guys know in a few days.

Thanks,
Ryno

projectRDM · 04-26-2005, 09:25 AM

There's a sizable gap on either side and the windshield edge is raked a little more. We did one a few years back in a car at UH just to see what it looked like. Personally I wouldn't be happy with the fitment but you can always build on to it.

JDMs13 · 04-26-2005, 03:26 PM

Quote:

Originally Posted by R240NA

There's a sizable gap on either side and the windshield edge is raked a little more. We did one a few years back in a car at UH just to see what it looked like. Personally I wouldn't be happy with the fitment but you can always build on to it.

What or where is UH?

projectRDM · 04-26-2005, 06:18 PM

Quote:

Originally Posted by JDMs13

What or where is UH?

Unstable-Hybrids, long gone now but they were a shop here in the Atlanta area, I knew all the guys from way back and used to hang out once in a while there to pick up parts, etc. They were building a RHD coupe and stuck the R32 dash in it for a test fit.

RedlineRacer · 04-26-2005, 08:27 PM

couldn't you just find some trashed sr dash and then have it wrapped? It wouldn't cost too much and probably look better and be easier than a R32 dash.

Ryno · 04-26-2005, 09:24 PM

Quote:

Originally Posted by RedlineRacer

couldn't you just find some trashed sr dash and then have it wrapped? It wouldn't cost too much and probably look better and be easier than a R32 dash.

That was my next option. I might wrap a s13 dash that I have with some suede, I think it would look pretty sweet.

04-25-2005, 07:23 PM	#1
Ryno Leaky Injector Join Date: Mar 2005 Location: Marietta, GA Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	r32 dash fit in s13??? I currently have no dash and have access to a skyline r32 dash from jarco. Does anybody know if will fit or atleast fit with little modification. If nobody knows then I guess I will give it a try this weekend. All the dashes from sr frontclips around here are beat to hell and the r32 dash is in good condition so that's why I am asking. Don't worry the car is already rhd. Ryno

04-25-2005, 08:32 PM	#7
BoroBoroS13 Zilvia Addict Join Date: Dec 2003 Location: Nor Cal Age: 41 Posts: 657 Trader Rating: (1) Feedback Score: 1 reviews	He has a rb26 makoto... turbos wont clear lhd steering crap. __________________

04-25-2005, 08:43 PM	#9
BoroBoroS13 Zilvia Addict Join Date: Dec 2003 Location: Nor Cal Age: 41 Posts: 657 Trader Rating: (1) Feedback Score: 1 reviews	So do u rev in? lol __________________

04-25-2005, 09:34 PM	#12
BoroBoroS13 Zilvia Addict Join Date: Dec 2003 Location: Nor Cal Age: 41 Posts: 657 Trader Rating: (1) Feedback Score: 1 reviews	Hes not using them :P This is snails old car... if your wondering why I know so much about it. lol __________________

04-26-2005, 09:25 AM	#15
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	There's a sizable gap on either side and the windshield edge is raked a little more. We did one a few years back in a car at UH just to see what it looked like. Personally I wouldn't be happy with the fitment but you can always build on to it. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

04-25-2005, 07:30 PM	#2
JDMs13 BANNED Join Date: Feb 2005 Location: New England Age: 41 Posts: 271 Trader Rating: (0) Feedback Score: 0 reviews	pheeeew....I was starting to get worried for a second there.

04-25-2005, 07:42 PM	#3
SR240DET Zilvia FREAK! Join Date: Mar 2002 Location: orida Posts: 1,490 Trader Rating: (0) Feedback Score: 0 reviews	welp.. guess that means your gonna have to take out the measure tape and compaire with the sr dash boards..

04-25-2005, 08:14 PM	#6
MakotoS13 BANNED Join Date: Jan 2004 Location: Texas Age: 42 Posts: 4,205 Trader Rating: (0) Feedback Score: 0 reviews	ya know, finding a dash would be easier if you had the steering wheel on the right side.

04-25-2005, 09:48 PM	#13
chris4130 Leaky Injector Join Date: Mar 2003 Location: va Posts: 147 Trader Rating: (0) Feedback Score: 0 reviews	I have a *decent s13 rhd dash. It's got a crack or 2 in it.. nothing too major. I just used my best one on a rhd conversion i did. Let me know if you want it, also.. I'll be picking up a front clip this weekend that may or may not have a good dash. e-mail me if your interested: [email protected]

04-26-2005, 09:20 AM	#14
Ryno Leaky Injector Join Date: Mar 2005 Location: Marietta, GA Posts: 52 Trader Rating: (0) Feedback Score: 0 reviews	I'll give it a try to see if fits this weekend. Hopefully no major modifications wil be needed to make it fit but I'll let you guys know in a few days. Thanks, Ryno

04-26-2005, 08:27 PM	#18
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	couldn't you just find some trashed sr dash and then have it wrapped? It wouldn't cost too much and probably look better and be easier than a R32 dash.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode