Orange wire problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bboyt3nsk · 06-05-2005, 10:43 AM

Under my dash where the ECU is your supposed to connect the wires for the tach and speedo and the ignition. The ignition is my main problem. I have an orange wire coming off my SR wiring harness (its supposed to be for ignition) but nothing off the KA harness to connect it to, I mean no orange wire that connects to it.
The problem my car is having is it will turn over and will start and run ONLY when i prime it with gas in the intake manifold. I am pretty sure that my injectors are not firing. I bought a new CAS ECU and wiring harness and new fuel filter and my fuel pump is putting out more then enough PSI.

I have a 1990 240SX with a redtop

06-05-2005, 10:43 AM	#1
bboyt3nsk Zilvia Member Join Date: May 2005 Location: Cleveland Age: 39 Posts: 222 Trader Rating: (0) Feedback Score: 0 reviews	Orange wire problem Under my dash where the ECU is your supposed to connect the wires for the tach and speedo and the ignition. The ignition is my main problem. I have an orange wire coming off my SR wiring harness (its supposed to be for ignition) but nothing off the KA harness to connect it to, I mean no orange wire that connects to it. The problem my car is having is it will turn over and will start and run ONLY when i prime it with gas in the intake manifold. I am pretty sure that my injectors are not firing. I bought a new CAS ECU and wiring harness and new fuel filter and my fuel pump is putting out more then enough PSI. I have a 1990 240SX with a redtop __________________ "General Motors: Because someone has to make rental cars"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode