|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
10-23-2005, 08:54 AM
|
#1 |
Vaccum Hoses
Ok, so here it is. I am coming to the end of a KA-SR20DET Swap, and need some help in the finishing. I installed a one piece Intake Manifold, it is a Greddy remake. You know one that looks like the greddy manifold, but half the price, found it on EBAY. Anyway, there are 8 vaccum port coming of the manifold, in varying sizes and locations, and I am losing my mind trying to figure out which vaccum line goes where and and which to plug. If anyone has any suggestion, please help. I would also like to leave all the emissions crap off my car. I am aware of the smog regulations, but frankly don't care.
Thanks Everyone.  |
|
|
|
| Sponsored Links |
|
10-23-2005, 07:25 PM
|
#2 |
|
No more nissan.
 
Join Date: Jan 2003
Location: RAIN, Washington.
Age: 40
Posts: 8,132
Trader Rating: (10)
  Feedback Score: 10 reviews
 |
it doesn't really matter which one goes where.. they will all read the same vacuum. and you don't have to use all the nipples, they're just there as 'extras' for whatever you might need a vacuum for. but make sure you plug the ones that you don't use, or you'll have a leak and you'll idle like shit
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
