anyone have pics of mounted FMIC? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Silverbullet · 11-03-2005, 02:58 PM

ok, so i have a Hybrid style FMIC with the single tab on top and two tabs on the bottom. I mounted the top tab, but not hte bottom two because i didn't see how i could do it wihtout making my own custom bracket. ...

months later... the tab on top broke off lol. I'm gonna get it rewelded on but i'd like to mount my FMIC on properly this time. I was wondering if anyone had pics of theirs mounted or pics of custom brackets u made.

*NemeGuero* · 11-03-2005, 04:32 PM

here's mine.. but if you're having it rewelded just get some angle iron and bend it to find some near by holes
http://www.zilvia.net/f/vbgarage.php?do=view&id=4370

.::SR20_240::. · 11-03-2005, 04:39 PM

sorry i have a off topic question, flame on... but here, i got a s13 greddy FMIC kit and i was wondering if it would fit on a s14 that has a s13 sr20 in it.

240SeXy! · 11-03-2005, 05:19 PM

WOW SEARCH NUB!!!!!!!!!! <-- sorry... freind had to write it, zilvians hate no searchers..

fuck dont make me get him, hes hungry for noobie anus....

nrg · 11-03-2005, 08:25 PM

Quote:

Originally Posted by .::SR20_240::.

sorry i have a off topic question, flame on... but here, i got a s13 greddy FMIC kit and i was wondering if it would fit on a s14 that has a s13 sr20 in it.

FMIC kits are based on engine not car. If you have s13 sr20, then you need a fmic piping kit that fits that engine. The reason is because of the throttle body location. But for the hot side, you need to add like 2 inch of piping to make it line up to the hot pipe you will see when you do this.

silverbullet. You need to reweld the upper bracket back, and mount the lower bracket some how. I went to Acehardware and bought a flat piece of metal with a bunch of holes already pre drilled into them. i just cut and bent my own brackets.

My lower driver side bracket:

here's a good thread: http://forums.freshalloy.com/ubbthre...e#Post68019869
blitz LM on s14 install: http://www.200sxweb.greatnow.com/how...lerinstall.htm

s13 and s14 are the same -installation wise.

statik · 11-03-2005, 09:17 PM

i have an s13 sr20 in my 97, and didnt have to modify the s13 VSPL kit AT ALL

krustindumm · 11-03-2005, 10:26 PM

Quote:

Originally Posted by statik

i have an s13 sr20 in my 97, and didnt have to modify the s13 VSPL kit AT ALL

S14 SR throttle body comes out straight, S13 is angled. The hole templates are a little off on the S13 VSPL kit, but it works. The S14 kit would not connect to the TB. You can also use the S13 SR VSPL kit on a S14 w/ KA

Silverbullet · 11-03-2005, 10:01 PM

err i realized i needed to make a bracket, i was just seeing what other ppl used to make it easier but it looks like nrg's got the perfect solution. Those holes make it MUCH easier to make a bracket. i love u.

SpeedMonkeyInc · 11-03-2005, 10:53 PM

I did exactly the same thing NRG did, it worked really well. My intercooler has two tabs on the bottom that I don't have any photos of, but it sounds very similar to yours. Same metal for the bottom brackets and just went to the bolts on the frame rails where the Nismo power brace bolts in. Here is a photo of my top bracket:

11-03-2005, 09:17 PM	#6
statik Zilvia FREAK! Join Date: Oct 2003 Location: Long Island, NY Age: 40 Posts: 1,358 Trader Rating: (0) Rides Gallery: statik Feedback Score: 0 reviews	i have an s13 sr20 in my 97, and didnt have to modify the s13 VSPL kit AT ALL __________________ 97 240sx esaarr \| Current Status: SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-03-2005, 04:32 PM	#2
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	here's mine.. but if you're having it rewelded just get some angle iron and bend it to find some near by holes http://www.zilvia.net/f/vbgarage.php?do=view&id=4370

11-03-2005, 04:39 PM	#3
.::SR20_240::. BANNED Join Date: Jun 2005 Location: south CA Age: 40 Posts: 324 Trader Rating: (0) Feedback Score: 0 reviews	sorry i have a off topic question, flame on... but here, i got a s13 greddy FMIC kit and i was wondering if it would fit on a s14 that has a s13 sr20 in it.

11-03-2005, 05:19 PM	#4
240SeXy! BANNED Join Date: Sep 2005 Location: CA, SoCal! Posts: 374 Trader Rating: (0) Feedback Score: 0 reviews	WOW SEARCH NUB!!!!!!!!!! <-- sorry... freind had to write it, zilvians hate no searchers.. fuck dont make me get him, hes hungry for noobie anus....

11-03-2005, 10:53 PM	#9
SpeedMonkeyInc Zilvia FREAK! Join Date: Apr 2003 Location: Oakland Age: 45 Posts: 1,271 Trader Rating: (0) Feedback Score: 0 reviews	I did exactly the same thing NRG did, it worked really well. My intercooler has two tabs on the bottom that I don't have any photos of, but it sounds very similar to yours. Same metal for the bottom brackets and just went to the bolts on the frame rails where the Nismo power brace bolts in. Here is a photo of my top bracket: