Exhaust Plans - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

MrMigs · 02-28-2002, 06:28 PM

Okay, here's what I was thinking about doing:

My friend wants to sell me his Advance Concepts Revolution (Stainless Steel) Muffler for 60 bucks. I *think it's got a 2.5 inch inlet and a 3.5 inch tip.

While I'm at the muffler shop, I'll have them install 2.5 inch piping: catback and weld the muffler onto that.

It should cost around 100 dollars or less. I probably won't be able to get mandrel bent piping because I'm guessing that it would be way too expensive, but with a N/A car and straighter machine-bent piping, I should still get pretty good results.

Sound good? An exhaust job for 100 dollars... Of course, I *could* get an N1 System, but instead I plan to use my saved money for ultra-stiff suspension.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-28-2002, 06:28 PM	#1
MrMigs Nissanaholic! Join Date: Jul 2001 Location: San Gabriel, CA Age: 41 Posts: 1,675 Trader Rating: (5) Feedback Score: 5 reviews	Okay, here's what I was thinking about doing: My friend wants to sell me his Advance Concepts Revolution (Stainless Steel) Muffler for 60 bucks. I think it's got a 2.5 inch inlet and a 3.5 inch tip. While I'm at the muffler shop, I'll have them install 2.5 inch piping: catback and weld the muffler onto that. It should cost around 100 dollars or less. I probably won't be able to get mandrel bent piping because I'm guessing that it would be way too expensive, but with a N/A car and straighter machine-bent piping, I should still get pretty good results. Sound good? An exhaust job for 100 dollars... Of course, I could* get an N1 System, but instead I plan to use my saved money for ultra-stiff suspension.