Seat Rail & 5-point harness - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

g6civcx · 02-12-2006, 09:50 AM

I am using the Cross (Bride-equivalent) rail with a bottom-mount Cobra seat (same bolt pattern as Bride). It fits very well (as seen below), except there is one problem: the center rail interferes with anti-submariner belt.

So now I'm pretty much left with 2 options:

1) Cut out the center rail, or
2) fabricate a custom mount.

Is there another rail I can try? JSpec says the Cross rail is identical to the Bride rail so I guess Bride is out.

I would like to have something that can be bolted on with no modification, but I guess if push came to shove the shop will have to bolt the seat straight to the chassis with no rail. I'd like to have slider adjustability though.

Thanks for any inputs.

02-12-2006, 09:50 AM	#1
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Seat Rail & 5-point harness I am using the Cross (Bride-equivalent) rail with a bottom-mount Cobra seat (same bolt pattern as Bride). It fits very well (as seen below), except there is one problem: the center rail interferes with anti-submariner belt. So now I'm pretty much left with 2 options: 1) Cut out the center rail, or 2) fabricate a custom mount. Is there another rail I can try? JSpec says the Cross rail is identical to the Bride rail so I guess Bride is out. I would like to have something that can be bolted on with no modification, but I guess if push came to shove the shop will have to bolt the seat straight to the chassis with no rail. I'd like to have slider adjustability though. Thanks for any inputs.