1995 s14 auto getting 5spd conversion w/ 98 parts. Will it work? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Redsunz916 · 02-22-2006, 12:57 PM

..............................

projectRDM · 02-22-2006, 01:13 PM

Keep the auto ECU. Using a OBD-II manual ECU will require some repinning and it won't pass inspection due to numerous codes. If anything find a 95 manual ECU,though you don't really need it either unless you want to keep from throwing A/T communcation codes.

Redsunz916 · 02-23-2006, 10:09 AM

oic, so the obdi ECu is similar to say the s13 ka24de ecus., where they will still work, with the exception of auto tranny codes? correct me if im wrong

koukidough · 02-23-2006, 12:56 PM

All the parts will swap perfectly, just use your stock ecu. You will see a light on your dash do to the auto ecu. Try to find a cheap used manual ecu for your car and it will cancel the light. Good luck should be cake

projectRDM · 02-23-2006, 02:35 PM

Quote:

Originally Posted by Redsunz916

oic, so the obdi ECu is similar to say the s13 ka24de ecus., where they will still work, with the exception of auto tranny codes? correct me if im wrong

Correct. Same goes for all models, but the 97-98 ECU has some pin changes for both A/C and the rear O2 sensor. Keeping the 95 ECU is fine.

02-22-2006, 12:57 PM	#1
Redsunz916 Zilvia Junkie Join Date: Dec 2004 Location: Sacramento Ca USA Posts: 403 Trader Rating: (0) Feedback Score: 0 reviews	1995 s14 auto getting 5spd conversion w/ 98 parts. Will it work? .............................. Last edited by Redsunz916; 09-25-2021 at 03:09 PM..

02-23-2006, 12:56 PM	#4
koukidough Zilvia Junkie Join Date: Feb 2006 Location: Long Beach, California Age: 43 Posts: 399 Trader Rating: (0) Feedback Score: 0 reviews	All the parts will swap perfectly, just use your stock ecu. You will see a light on your dash do to the auto ecu. Try to find a cheap used manual ecu for your car and it will cancel the light. Good luck should be cake __________________ 1997 Nissan S14 SE Redtop SR20DET @12psi 1999 Honda Civic Hatch EK9 N/A b16a2 (SOLD)

02-22-2006, 01:13 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Keep the auto ECU. Using a OBD-II manual ECU will require some repinning and it won't pass inspection due to numerous codes. If anything find a 95 manual ECU,though you don't really need it either unless you want to keep from throwing A/T communcation codes.

02-23-2006, 10:09 AM	#3
Redsunz916 Zilvia Junkie Join Date: Dec 2004 Location: Sacramento Ca USA Posts: 403 Trader Rating: (0) Feedback Score: 0 reviews	oic, so the obdi ECu is similar to say the s13 ka24de ecus., where they will still work, with the exception of auto tranny codes? correct me if im wrong