Hoses - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

FutureDrft*732 · 03-20-2006, 11:42 AM

OK i have been researching on what hoses i need because i got a sr swap. no front clip juts motor trans ecu etc. i got everything i needed but they have cut all of the hoses. now i have called nissan dealerships and they do not carry any of the hoses for the SR. i was wondering if their is any part #'s out their for all the hose or if their is a web site that has them all labeled or something of that sort. i have the shop manuel for the SR that i have gotten off of www.zeroyon.com and they show where the hose hook to but i do not know where to find the hoses at. so any kind of help would be very great ful. this is the only thing i need to get everything running. i have the radiator hose but all of the vacum lines i fiqured i could just buy vacuum line and cut them to size. but everything that is pre-molded i would need. so please help im a newb.

thanks very much,

Josh

P.S. i hope this isnt a dumb ?. i know you all hate dumb ?'s but i think their is people out their that need the same help i do. so please be kind and help us fools in the world.

sblack13 · 03-20-2006, 12:53 PM

which hoses do you need? I got a motorset as well, and i bought the heater hose's from heavy throttle. For fuel lines i bought some standard fuel lines at the auto parts store. For the power steering was a little tricky, I used heater hoses off some car. But it worked.

FutureDrft*732 · 03-20-2006, 02:58 PM

well i got heater hose and fuel lines. some of the vacuum lines i just took off of the old motor. but someof the lines that i have troble with is the brake boost?!?!? where do i hook that to. also the coolent lines (i think) on the back of the motor. their is 2 of them...do i have to re-route them over to the heater core side. i think they are coolent lines i would think they are. but not for sure. those are pretty much the ones that i have troble with. everything else im cool with. b ut i am still out looking at the motor and still looking at what needs what. if i see anything else then i will jit back. but help with the ones on the back of the motor would be cool.

03-20-2006, 11:42 AM	#1
FutureDrft*732 Join Date: Mar 2006 Location: Lusby Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	Hoses OK i have been researching on what hoses i need because i got a sr swap. no front clip juts motor trans ecu etc. i got everything i needed but they have cut all of the hoses. now i have called nissan dealerships and they do not carry any of the hoses for the SR. i was wondering if their is any part #'s out their for all the hose or if their is a web site that has them all labeled or something of that sort. i have the shop manuel for the SR that i have gotten off of www.zeroyon.com and they show where the hose hook to but i do not know where to find the hoses at. so any kind of help would be very great ful. this is the only thing i need to get everything running. i have the radiator hose but all of the vacum lines i fiqured i could just buy vacuum line and cut them to size. but everything that is pre-molded i would need. so please help im a newb. thanks very much, Josh P.S. i hope this isnt a dumb ?. i know you all hate dumb ?'s but i think their is people out their that need the same help i do. so please be kind and help us fools in the world.

03-20-2006, 12:53 PM	#2
sblack13 Zilvia FREAK! Join Date: May 2005 Location: Seattle Age: 38 Posts: 1,016 Trader Rating: (10) Feedback Score: 10 reviews	which hoses do you need? I got a motorset as well, and i bought the heater hose's from heavy throttle. For fuel lines i bought some standard fuel lines at the auto parts store. For the power steering was a little tricky, I used heater hoses off some car. But it worked.

03-20-2006, 02:58 PM	#3
FutureDrft*732 Join Date: Mar 2006 Location: Lusby Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	well i got heater hose and fuel lines. some of the vacuum lines i just took off of the old motor. but someof the lines that i have troble with is the brake boost?!?!? where do i hook that to. also the coolent lines (i think) on the back of the motor. their is 2 of them...do i have to re-route them over to the heater core side. i think they are coolent lines i would think they are. but not for sure. those are pretty much the ones that i have troble with. everything else im cool with. b ut i am still out looking at the motor and still looking at what needs what. if i see anything else then i will jit back. but help with the ones on the back of the motor would be cool.