what are these/what to do when swapping - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Tenchuu · 03-24-2006, 09:52 PM

so i was wondering what these are, and i am sure that they don' line up with a RB but looking to know what to do with them:

#1

#2

***S14DB*** · 03-24-2006, 10:24 PM

Top is your Evap purge system located behind your rear pass tire. Should look like this when you take that shit out:

Second shot is your MAP sensor at the top right. The MAP/BARO solenoid switch valve in the center.

Ritz S14 · 03-24-2006, 10:31 PM

Yup. Part of your evaporative control systems. It collects gas vapor, and purges them into the intake when the car is warmed up and at cruising speeds.

I don't suggest to leave the plug off like that.

koukidough · 03-24-2006, 11:48 PM

Quote:

Originally Posted by S14DB

Top is your Evap purge system located behind your rear pass tire. Should look like this when you take that shit out:

Second shot is your MAP sensor at the top right. The MAP/BARO solenoid switch valve in the center.

is it really okay to remove that whole evap system from the pas rear? If so I will do it just because.

nistech · 03-24-2006, 11:52 PM

why did u post it in off topic?
i think tech talk or chat would of been the right place to post this

***S14DB*** · 03-25-2006, 12:01 AM

Quote:

Originally Posted by koukidough

is it really okay to remove that whole evap system from the pas rear? If so I will do it just because.

Not if you have the KA ECU. Seeing you have the SR. I assume you can rip that shit out.

koukidough · 03-25-2006, 12:15 AM

Quote:

Originally Posted by S14DB

Not if you have the KA ECU. Seeing you have the SR. I assume you can rip that shit out.

on goes my latex gloves

Tenchuu · 03-25-2006, 11:11 AM

well the KA is long gone and a RB is 1/2 way in so i was just looking ahead at what to do with it. Thanks for moveing it to tech talk, i guess i started it in the wrong window.

03-24-2006, 11:52 PM	#5
nistech Zilvia Addict Join Date: Dec 2004 Location: CAli Age: 41 Posts: 746 Trader Rating: (0) Feedback Score: 0 reviews	why did u post it in off topic? i think tech talk or chat would of been the right place to post this __________________

03-24-2006, 09:52 PM	#1
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	what are these/what to do when swapping so i was wondering what these are, and i am sure that they don' line up with a RB but looking to know what to do with them: #1 #2

03-24-2006, 10:24 PM	#2
*S14DB* AFC #1 Join Date: Oct 2003 Location: 昨晩あなたのお母さんの家 Posts: 20,181 Trader Rating: (3) Feedback Score: 3 reviews	Top is your Evap purge system located behind your rear pass tire. Should look like this when you take that shit out: Second shot is your MAP sensor at the top right. The MAP/BARO solenoid switch valve in the center. __________________ Comments should be taken as Opinions not as Statements of Fact

03-24-2006, 10:31 PM	#3
Ritz S14 Post Whore! Join Date: Jul 2004 Location: C A L I F O R N I A Age: 43 Posts: 3,586 Trader Rating: (0) Feedback Score: 0 reviews	Yup. Part of your evaporative control systems. It collects gas vapor, and purges them into the intake when the car is warmed up and at cruising speeds. I don't suggest to leave the plug off like that.

03-25-2006, 11:11 AM	#8
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	well the KA is long gone and a RB is 1/2 way in so i was just looking ahead at what to do with it. Thanks for moveing it to tech talk, i guess i started it in the wrong window.