CAS setting. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240SRX · 04-03-2006, 01:19 PM

my friend and I have been messing around with my car for about a week (redtop sr20det). we swapped the motor and got everything hooked up. tried starting it...and all it did was crank over and not come close to starting. i get fuel/spark. trying to figure out what exactly was wrong with it.. my friend compression tested it to make sure the seals were good still... and it has good compression. all the vacuum lines are in. tried starting it some more since the motor had been sitting for a while..and it kept cranking, over and over. so we finally go to adjusting the CAS and it almost started. so we kept trying with it and then nothing. we can't find anywhere that tells you what certain degree or anything that it should be set at. been asking around and no one really knows. any ideas?

04-03-2006, 01:19 PM	#1
240SRX Join Date: Apr 2006 Location: Fl Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	CAS setting. my friend and I have been messing around with my car for about a week (redtop sr20det). we swapped the motor and got everything hooked up. tried starting it...and all it did was crank over and not come close to starting. i get fuel/spark. trying to figure out what exactly was wrong with it.. my friend compression tested it to make sure the seals were good still... and it has good compression. all the vacuum lines are in. tried starting it some more since the motor had been sitting for a while..and it kept cranking, over and over. so we finally go to adjusting the CAS and it almost started. so we kept trying with it and then nothing. we can't find anywhere that tells you what certain degree or anything that it should be set at. been asking around and no one really knows. any ideas?