Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-26-2006, 06:49 PM   #1
jdm_s14_zenki
Zilvia Addict
 
Join Date: Jan 2006
Location: Orange County
Posts: 703
Trader Rating: (1)
jdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of light
Feedback Score: 1 reviews
Send a message via AIM to jdm_s14_zenki
weird sr stumbling problem!

i replaced my bov yesterday cus there was a leak in my old one. now it idles better but now i have another problem.

At cold start idling, it will idle a little above 1k rpm which is fine, but every 5 seconds or so it will stumble a little bit. you can hear the exhaust kind of burping.. it keeps doing that at idle until i drive the car around a little while.

i wonder if my plugs are fouled? i checked them a couple days ago and they were fine..what else could it be?

also, when i restart my car when the engine is warm, the engine almost dies then comes right back up, then idle goes down again, then smooths out after i give it a little gas..ive learned to deal with it just by hitting the gas a little after i start the car..its annoying though knowing theres something not quite right.

Let me know what you guys think! thanks.
jdm_s14_zenki is offline   Reply With Quote
Sponsored Links
Old 04-26-2006, 06:59 PM   #2
g6civcx
Post Whore!
 
g6civcx's Avatar
 
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
g6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfection
Feedback Score: 5 reviews
Check all your vacuum lines.
g6civcx is offline   Reply With Quote
Old 04-26-2006, 07:04 PM   #3
jdm_s14_zenki
Zilvia Addict
 
Join Date: Jan 2006
Location: Orange County
Posts: 703
Trader Rating: (1)
jdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of light
Feedback Score: 1 reviews
Send a message via AIM to jdm_s14_zenki
i did..those are the first things i always check. maybe im missing something. or maybe my bov is still leaking? i have the adjustment screw on the bov all the way loose..could that be the problem?

ive heard the coolant temp sensor might mess with your idle and stuff?
jdm_s14_zenki is offline   Reply With Quote
Old 04-26-2006, 07:19 PM   #4
pRaHjeC
Leaky Injector
 
Join Date: Apr 2004
Location: San Diego/Pomona
Age: 39
Posts: 105
Trader Rating: (0)
pRaHjeC is on a distinguished road
Feedback Score: 0 reviews
Send a message via AIM to pRaHjeC
tighten the adjustment screw a little and see if that helps. i had the same problem with my sr and that was the solution.
pRaHjeC is offline   Reply With Quote
Old 04-26-2006, 07:41 PM   #5
jdm_s14_zenki
Zilvia Addict
 
Join Date: Jan 2006
Location: Orange County
Posts: 703
Trader Rating: (1)
jdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of light
Feedback Score: 1 reviews
Send a message via AIM to jdm_s14_zenki
ill def. try that. any other suggestions anyone?
jdm_s14_zenki is offline   Reply With Quote
Old 04-26-2006, 10:34 PM   #6
g6civcx
Post Whore!
 
g6civcx's Avatar
 
Join Date: Apr 2004
Location: Virginia, USA
Posts: 5,764
Trader Rating: (5)
g6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfectiong6civcx is close to perfection
Feedback Score: 5 reviews
Adjust it as tightly as possible without causing compressor surge. You will have to play with the adjustment. It should vent under light boost. You don't need it to vent when revving in neutral.
g6civcx is offline   Reply With Quote
Old 04-27-2006, 01:43 PM   #7
jdm_s14_zenki
Zilvia Addict
 
Join Date: Jan 2006
Location: Orange County
Posts: 703
Trader Rating: (1)
jdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of lightjdm_s14_zenki is a glorious beacon of light
Feedback Score: 1 reviews
Send a message via AIM to jdm_s14_zenki
no matter how far i tighten it, i still get the fluttering sound from the intake... even when im in neutral. and when im driving, it flutters even when im in vacuum..and i still get the cold engine stumbles.
jdm_s14_zenki is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net