Anyone with S13 GReddy pulley kit... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Boney · 05-28-2006, 12:39 PM

I recently had a problem with my GReddy alternator pulley and wanted to see if this has happened to anyone else. They supply you with a washer to go behind the pulley to prevent the pulley from rubbing against the alternator. I know I insstalled it right.. I drove about 1500 miles and then noticed some sound coming from that area. Well the pulley was rubbing against the alternator occasionally. I was then driving down the road and bam, the pulley gets jammed, breaks off and seizes my alternator's shaft. The aluminum melted inside of it. I then bought a KA alternator, put my stock SR pulley on it, and drilled out the top hole so the bolt could fit through and its fine... Has this happened to anyone else with the S13 greddy pulley kit (sr20det)?

05-28-2006, 12:39 PM	#1
Boney Zilvia Member Join Date: Nov 2005 Location: Boston, MA Posts: 197 Trader Rating: (1) Rides Gallery: Boney Feedback Score: 1 reviews	Anyone with S13 GReddy pulley kit... I recently had a problem with my GReddy alternator pulley and wanted to see if this has happened to anyone else. They supply you with a washer to go behind the pulley to prevent the pulley from rubbing against the alternator. I know I insstalled it right.. I drove about 1500 miles and then noticed some sound coming from that area. Well the pulley was rubbing against the alternator occasionally. I was then driving down the road and bam, the pulley gets jammed, breaks off and seizes my alternator's shaft. The aluminum melted inside of it. I then bought a KA alternator, put my stock SR pulley on it, and drilled out the top hole so the bolt could fit through and its fine... Has this happened to anyone else with the S13 greddy pulley kit (sr20det)? __________________ 91 Coupe