97-98 COVERSION UPDATE 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s14vaxlr8 · 06-09-2002, 07:34 PM

ok well every thing has been put on except the hood, well becasue i havent recieved it <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt='

'>

but know after putting the bumper on that im going to need the 97-98 retainer clip and the bumper reinforcment, everything else is good though,

the 3 wires i figured
1. switch
2.constant
3. ground
i just crimped the switch with the red and the black with the black...the other wire is pointless..

i took like 100 pictures...is there any host page other than webshots and eframes where i can put them up step by step

well its 930 time to wash up

*nismo270r* · 06-09-2002, 10:26 PM

I don't remember exactly what's what, but the three wires are as you described.  The switched kicks on the high beam filament when you turn them on.  The low beam filament in the H4 bulb remains lit.  On the Kouki, the H1 low beam has only one filament, hence only two wires.  Can't wait to see the pics!

s14vaxlr8 · 06-10-2002, 07:51 AM

yeah i double checked and triple checked to make sure every thing was up to snuff, also making sure that when the highs were on the lows turned off, i did notice though that where the headlights screw up to the bars infront of the radiator they dont fit perfectly like the 96 but i drilled a new hole and fixed that, the lights were still level also

tzonni · 06-10-2002, 02:15 PM

this should also be posted on one of the other zilvia.net departments that you see on the home page for future reference

240racr · 06-10-2002, 02:34 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (s14vaxlr8 @ June 10 2002,06:51)</td></tr><tr><td id="QUOTE">also making sure that when the highs were on the lows turned off,</td></tr></table><span id='postcolor'>
The lows on a '97-'98 should stay on when the highs are on. The fog lights should turn off when the highs are on.

**West** · 06-10-2002, 02:38 PM

If you would type up a how to with the pictures and then send it to me, ill add it to the installs section. I can host the pictures too.

astroboy000 · 06-10-2002, 04:33 PM

how much have u spent on the conversion so far?

s14vaxlr8 · 06-11-2002, 04:28 PM

hey mark if you can give me a site to host all the pics up on i can do a step by step install, the carbon hood should be here soon so ill just finish the install next week an get them out to you

the whole setup was 2300 i think with bomex front end carbon hood and ings turn lenses

THE LOWS SHOULD STAY ON WHEN THE HIGHS ARE ON...AWW SHT F IT IM NOT MESSING WITH IT< they didnt on my 96 headlights , i never use my highs really anyway

Anubis · 06-11-2002, 05:09 PM

cant wait to see the pics! You did all the work yourself right?

s14vaxlr8 · 06-12-2002, 05:14 AM

yep everything but the paint, we are prepping it today, after i go to nissan and order the reinforcment and retainer clip for the 97-98

BEISSEN · 06-12-2002, 09:43 AM

Hey cody i can host your pics fro you if you want you will have to sent them as an attachment in an e-mail it may take awhile but ge throught but i can put them up.Hey you can check out the pics from the last meet if you have not already yet.meet pics

s14vaxlr8 · 06-12-2002, 10:15 AM

i want to use a site like webshots, or eframes so i can insert the pics into the forum for install page....thanks for the offer though

BEISSEN · 06-12-2002, 08:21 PM

ok but you can do whatever you want with the page i have as well i can give you all the urls so you can link them as well.On the forum or where ever you want.But hey it's up to you.

06-09-2002, 07:34 PM	#1
s14vaxlr8 Zilvia Junkie Join Date: Nov 2001 Location: DC Metro Age: 43 Posts: 522 Trader Rating: (0) Feedback Score: 0 reviews	ok well every thing has been put on except the hood, well becasue i havent recieved it <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=''> but know after putting the bumper on that im going to need the 97-98 retainer clip and the bumper reinforcment, everything else is good though, the 3 wires i figured 1. switch 2.constant 3. ground i just crimped the switch with the red and the black with the black...the other wire is pointless.. i took like 100 pictures...is there any host page other than webshots and eframes where i can put them up step by step well its 930 time to wash up __________________ 96 Kouki w/sr20det for sale http://www.zilvia.net/f/showthread.php?t=66164

06-09-2002, 10:26 PM	#2
nismo270r Premium Member Join Date: Oct 2001 Location: Lafayette, IN Age: 45 Posts: 715 Trader Rating: (0) Feedback Score: 0 reviews	I don't remember exactly what's what, but the three wires are as you described.  The switched kicks on the high beam filament when you turn them on.  The low beam filament in the H4 bulb remains lit.  On the Kouki, the H1 low beam has only one filament, hence only two wires.  Can't wait to see the pics! __________________ "Life is a bitch...be it's pimp!" APC = A Piece of Crap =P

06-10-2002, 07:51 AM	#3
s14vaxlr8 Zilvia Junkie Join Date: Nov 2001 Location: DC Metro Age: 43 Posts: 522 Trader Rating: (0) Feedback Score: 0 reviews	yeah i double checked and triple checked to make sure every thing was up to snuff, also making sure that when the highs were on the lows turned off, i did notice though that where the headlights screw up to the bars infront of the radiator they dont fit perfectly like the 96 but i drilled a new hole and fixed that, the lights were still level also __________________ 96 Kouki w/sr20det for sale http://www.zilvia.net/f/showthread.php?t=66164

06-10-2002, 02:34 PM	#5
240racr Leaky Injector Join Date: Mar 2002 Location: Hillsboro, OR Age: 49 Posts: 95 Trader Rating: (0) Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (s14vaxlr8 @ June 10 2002,06:51)</td></tr><tr><td id="QUOTE">also making sure that when the highs were on the lows turned off,</td></tr></table><span id='postcolor'> The lows on a '97-'98 should stay on when the highs are on. The fog lights should turn off when the highs are on. __________________ Precision T3/T4, 65lb injectors, z32 brakes, AEM EMS, 360WHP

06-10-2002, 02:38 PM	#6
West OMNOMNOMNOM Join Date: Dec 2000 Location: Denver, CO Age: 44 Posts: 6,456 Trader Rating: (0) Rides Gallery: West Feedback Score: 0 reviews	If you would type up a how to with the pictures and then send it to me, ill add it to the installs section. I can host the pictures too. __________________ West - Zilvia.net - Toyobaru.net - NapkinSketch.com

06-10-2002, 02:15 PM	#4
tzonni Join Date: May 2002 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	this should also be posted on one of the other zilvia.net departments that you see on the home page for future reference

06-10-2002, 04:33 PM	#7
astroboy000 Join Date: Nov 2001 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	how much have u spent on the conversion so far?

06-11-2002, 04:28 PM	#8
s14vaxlr8 Zilvia Junkie Join Date: Nov 2001 Location: DC Metro Age: 43 Posts: 522 Trader Rating: (0) Feedback Score: 0 reviews	hey mark if you can give me a site to host all the pics up on i can do a step by step install, the carbon hood should be here soon so ill just finish the install next week an get them out to you the whole setup was 2300 i think with bomex front end carbon hood and ings turn lenses THE LOWS SHOULD STAY ON WHEN THE HIGHS ARE ON...AWW SHT F IT IM NOT MESSING WITH IT< they didnt on my 96 headlights , i never use my highs really anyway __________________ 96 Kouki w/sr20det for sale http://www.zilvia.net/f/showthread.php?t=66164

06-11-2002, 05:09 PM	#9
Anubis BANNED Join Date: Nov 2001 Location: SAN DIEGO, CA Age: 39 Posts: 990 Trader Rating: (0) Feedback Score: 0 reviews	cant wait to see the pics! You did all the work yourself right?

06-12-2002, 05:14 AM	#10
s14vaxlr8 Zilvia Junkie Join Date: Nov 2001 Location: DC Metro Age: 43 Posts: 522 Trader Rating: (0) Feedback Score: 0 reviews	yep everything but the paint, we are prepping it today, after i go to nissan and order the reinforcment and retainer clip for the 97-98 __________________ 96 Kouki w/sr20det for sale http://www.zilvia.net/f/showthread.php?t=66164

06-12-2002, 09:43 AM	#11
BEISSEN Zilvia FREAK! Join Date: Nov 2001 Location: Woodbridge,VA Age: 42 Posts: 1,028 Trader Rating: (0) Feedback Score: 0 reviews	Hey cody i can host your pics fro you if you want you will have to sent them as an attachment in an e-mail it may take awhile but ge throught but i can put them up.Hey you can check out the pics from the last meet if you have not already yet.meet pics

06-12-2002, 10:15 AM	#12
s14vaxlr8 Zilvia Junkie Join Date: Nov 2001 Location: DC Metro Age: 43 Posts: 522 Trader Rating: (0) Feedback Score: 0 reviews	i want to use a site like webshots, or eframes so i can insert the pics into the forum for install page....thanks for the offer though __________________ 96 Kouki w/sr20det for sale http://www.zilvia.net/f/showthread.php?t=66164

06-12-2002, 08:21 PM	#13
BEISSEN Zilvia FREAK! Join Date: Nov 2001 Location: Woodbridge,VA Age: 42 Posts: 1,028 Trader Rating: (0) Feedback Score: 0 reviews	ok but you can do whatever you want with the page i have as well i can give you all the urls so you can link them as well.On the forum or where ever you want.But hey it's up to you.