Fuel Rail Removal Need help ASAP!!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gumaheru · 06-11-2006, 08:28 PM

Hi everyone. I have searched far and wide and consulted my FSM, but none have given me hope. I have a 92 rps13 ka24de. I am trying to removal the fuel rail to replace my injectors (tried pulling them and using the wd40, but didn't work). I have removed the two bolts that attach it to the intake manifold. The size closets to the front of the engine will come up, but the rear won't. I have taken a look and I can see that there is a bolt that is holding the fuel pressure regulator to the block. There isn't a bolt holding it on. Well here is the problem, the bolts that attach the rail to the manifold are at an angle. The bold attaching the fuel pressure regulator to the block is horizontal. How am I suppose to remove the rail if the bolts aren't pointing in the same direction? I appreciate any help that anyone can give me.

06-11-2006, 08:28 PM	#1
gumaheru Join Date: Dec 2003 Location: california Posts: 40 Trader Rating: (1) Feedback Score: 1 reviews	Fuel Rail Removal Need help ASAP!!!!!! Hi everyone. I have searched far and wide and consulted my FSM, but none have given me hope. I have a 92 rps13 ka24de. I am trying to removal the fuel rail to replace my injectors (tried pulling them and using the wd40, but didn't work). I have removed the two bolts that attach it to the intake manifold. The size closets to the front of the engine will come up, but the rear won't. I have taken a look and I can see that there is a bolt that is holding the fuel pressure regulator to the block. There isn't a bolt holding it on. Well here is the problem, the bolts that attach the rail to the manifold are at an angle. The bold attaching the fuel pressure regulator to the block is horizontal. How am I suppose to remove the rail if the bolts aren't pointing in the same direction? I appreciate any help that anyone can give me.