Need help, injector removal... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

wutangben · 06-26-2006, 10:13 PM

Anyone have any tips on how to remove stock SR injectors from the fuel rail? They don't really want to budge, and i don't want to break the plastic by prying on it... I sold the injectors to one guy, and the fuel rail to another guy, so I really need to get them apart... Any advice is much appreciated!

Thanks,
Ben

ou1848 · 06-26-2006, 11:03 PM

take the injector and rotate it 180degrees. Then take a wide tip flat screwdriver and stick it between the rail and the ride on the injectore. Pry up about 5mm and the thing will pop out. You will likely need new o-rings

m

wutangben · 06-26-2006, 11:20 PM

Quote:

Originally Posted by ou1848

take the injector and rotate it 180degrees. Then take a wide tip flat screwdriver and stick it between the rail and the ride on the injectore. Pry up about 5mm and the thing will pop out. You will likely need new o-rings

m

the purple plastic just breaks away... also will they only come out at 180 degrees?

06-26-2006, 10:13 PM	#1
wutangben Zilvia Addict Join Date: Sep 2003 Location: IL Age: 44 Posts: 739 Trader Rating: (3) Feedback Score: 3 reviews	Need help, injector removal... Anyone have any tips on how to remove stock SR injectors from the fuel rail? They don't really want to budge, and i don't want to break the plastic by prying on it... I sold the injectors to one guy, and the fuel rail to another guy, so I really need to get them apart... Any advice is much appreciated! Thanks, Ben

06-26-2006, 11:03 PM	#2
ou1848 Join Date: Mar 2004 Location: Cleveland, OH Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	take the injector and rotate it 180degrees. Then take a wide tip flat screwdriver and stick it between the rail and the ride on the injectore. Pry up about 5mm and the thing will pop out. You will likely need new o-rings m