What can I actually use - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tdawg88 · 07-11-2006, 11:20 PM

I have a z32 that Im taking parts off right now. The car came hooked up with after market stuff and wondering what can I use for my 240sx? I am thinking will the whole rear end fit? how about this, I read in one of the forums not sure if zilvia.net that the tie rods off the z32 fit the s13 and that they are as good as the tein? does that hold any truth? Just curious otherwise I know what to part out and send to hell. Well any help will certainly aid my dismantle. Thanx in advance.

tdawg

vutony · 07-12-2006, 12:07 AM

maf, ignitor chip, rear end (diff w/axles and brakes), wheels...thats all i can think of rite now

tdawg88 · 07-12-2006, 01:32 AM

hmmm duely noted and I will take those parts out tomorrow. Will the sub frame fit? Coz this thing is freaking hooked up with new bushings and spacers etc. Not really sure what the hell those things help for but I figure since Im dumping the car I might aswell take what I can.

projectRDM · 07-12-2006, 04:35 AM

You didn't even try to search, did you?

Subframe will not fit, neither will the diff without different output shafts. If it's a TT, nothing in the back will fit except the shocks.

Quit being lazy and do some research.

j00ni3 · 07-12-2006, 02:22 PM

just take everything you can and sell it on ebay ^^

tdawg88 · 07-12-2006, 08:21 PM

On the contrary, i did search. Wasnt really certain how to pose my question however as nothing showed up if I input: "what actually fits off a "Z"? thus I thought Id ask, provided that people are willing enough to respond. Pls erase this post man, I'll figure this out the hard way. Thanx all those who replied. Assitance was highly appreciated.

tdawg

theicecreamdan · 07-12-2006, 08:26 PM

Z is a pretty weak thing to use in search, try things like z32 300zx etc.

tdawg88 · 07-14-2006, 12:44 AM

sorry man i was being sarcastic. I did search however and just couldnt find what would satisfy my curiosity so I thought Id ask. simply put i understand why you wouldnt want repeat posts etc etc. and honestly my bad but the information was just not enough so I will continue searching though. Thanx

tdawg88 · 07-15-2006, 09:43 PM

Ok! so thanks to the "searching" i managed to find a way to accomplish a lot TODAY!!! so im hella happy. I installed the Diff off an auto z32 2+2. I was told all z's came with vlsd's is this true? in either case, I used 1 z32 output shaft and swapped in 1 regular s13 output shaft because the z's were too long. will this cause any problems? Seems to work great thus far! however I feel the car a bit sluggish. also swapped the rear hubs and am using z32 wheels could that be the problem? And is clearance of the wheels ok for using Tein HE suspension? Car Drifts Awesomely so im concerned why I find it sluggish. Any help would be very appreciated thanx.

07-11-2006, 11:20 PM	#1
tdawg88 Leaky Injector Join Date: Feb 2006 Location: Cali Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	What can I actually use I have a z32 that Im taking parts off right now. The car came hooked up with after market stuff and wondering what can I use for my 240sx? I am thinking will the whole rear end fit? how about this, I read in one of the forums not sure if zilvia.net that the tie rods off the z32 fit the s13 and that they are as good as the tein? does that hold any truth? Just curious otherwise I know what to part out and send to hell. Well any help will certainly aid my dismantle. Thanx in advance. tdawg

07-12-2006, 12:07 AM	#2
vutony Post Whore! Join Date: Jul 2005 Location: (714) OC area Posts: 5,273 Trader Rating: (145) Feedback Score: 145 reviews	maf, ignitor chip, rear end (diff w/axles and brakes), wheels...thats all i can think of rite now __________________ i have engine hoist for rent i do SR wiring

07-12-2006, 02:22 PM	#5
j00ni3 Zilvia Member Join Date: Mar 2006 Location: NYC.... 브롱동~ Posts: 273 Trader Rating: (1) Feedback Score: 1 reviews	just take everything you can and sell it on ebay ^^ __________________ 빨리 달리자... 싫으면 말고~ driver's side window button fix

07-12-2006, 01:32 AM	#3
tdawg88 Leaky Injector Join Date: Feb 2006 Location: Cali Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	hmmm duely noted and I will take those parts out tomorrow. Will the sub frame fit? Coz this thing is freaking hooked up with new bushings and spacers etc. Not really sure what the hell those things help for but I figure since Im dumping the car I might aswell take what I can.

07-12-2006, 04:35 AM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You didn't even try to search, did you? Subframe will not fit, neither will the diff without different output shafts. If it's a TT, nothing in the back will fit except the shocks. Quit being lazy and do some research.

07-12-2006, 08:21 PM	#6
tdawg88 Leaky Injector Join Date: Feb 2006 Location: Cali Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	On the contrary, i did search. Wasnt really certain how to pose my question however as nothing showed up if I input: "what actually fits off a "Z"? thus I thought Id ask, provided that people are willing enough to respond. Pls erase this post man, I'll figure this out the hard way. Thanx all those who replied. Assitance was highly appreciated. tdawg

07-14-2006, 12:44 AM	#8
tdawg88 Leaky Injector Join Date: Feb 2006 Location: Cali Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	sorry man i was being sarcastic. I did search however and just couldnt find what would satisfy my curiosity so I thought Id ask. simply put i understand why you wouldnt want repeat posts etc etc. and honestly my bad but the information was just not enough so I will continue searching though. Thanx

07-15-2006, 09:43 PM	#9
tdawg88 Leaky Injector Join Date: Feb 2006 Location: Cali Posts: 98 Trader Rating: (0) Feedback Score: 0 reviews	Ok! so thanks to the "searching" i managed to find a way to accomplish a lot TODAY!!! so im hella happy. I installed the Diff off an auto z32 2+2. I was told all z's came with vlsd's is this true? in either case, I used 1 z32 output shaft and swapped in 1 regular s13 output shaft because the z's were too long. will this cause any problems? Seems to work great thus far! however I feel the car a bit sluggish. also swapped the rear hubs and am using z32 wheels could that be the problem? And is clearance of the wheels ok for using Tein HE suspension? Car Drifts Awesomely so im concerned why I find it sluggish. Any help would be very appreciated thanx.