Guages Not Working Problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

WHITELINES · 09-10-2006, 08:01 AM

First, Thank You For Your Time .ok.i Recently Swapt Out My Dash From One 240 To Another .i Did This Job Well I Did It Like 3 Weeks Ago With No Problem .and Need To Swap It Back Because I Got A Good Deal On Anoher 240 But Now I Have A Problem Where My Guages Dont Work The Turn Signal's Work But My Rpm-speed-temp-gas- Dont Work And Also The Seatbelt Light Stais On As Well As The Other Lights .i've Never Had This Problem Before ..and The Weirdest Thing Is I Got The Other 240 Cluster To Check If It Was This Causing The Problem But No ..i Put Everything Together As Is ..then Put The Dash In The Other 240 After I Finished I Reconnected The Neg Battery Terminal And When I Saw The Guages Same Thing ?? What Gives.. The Clock Illuminates But No Digits The Check Engin Lights Turns On Without The Key In The Ignition ..please Help..thank You

projectRDM · 09-10-2006, 08:45 AM

Jesus man, learn how to type properly. I can't even begin to read that garbled mess.

WHITELINES · 09-10-2006, 10:19 AM

wow thanks r240na that just about fixed my problem .your the greatest .man just when i got more than plenty of problems ..all i need is some positive feedback to my issue...please.. "" THANK-YOU"" ! !

Edgar · 09-10-2006, 10:30 AM

He would be able to help you if you would just type correctly in English.
Damn I cant even understand it. Fail

***FaLKoN240*** · 09-10-2006, 10:58 AM

1. Turn off CAPS LOCKS.

2. Learn how to capitalize properly.

3. LEARN HOW TO FUCKING PUNCUATE.

4. Learn how to properly form a statement that is legible.

5. Try to post on Zilvia again.

Thank you.

WHITELINES · 09-10-2006, 01:09 PM

Man you guys are full of amazing help & expertise.!.
ok i reconize i mispelled some words and my puncuation sucks.am 20 years old but my I.Q. is that of an 5th grader .ok am retarded.so i said it.But am doing better everyday so my doctor tells me.Back to the "original post" any "positive feed back" or ideas..please

SNC240SX · 09-10-2006, 01:12 PM

Welcome to Zilvia home of the grammar police. Try messing around with the screws in the back of the cluster i had a similar problem on my gauge and it just needed the screws in the back to be changed a little

g6civcx · 09-10-2006, 05:19 PM

Check ECU harness and front left fender harness.

Diagnosing electrical gremlins are the worst kind, and not being able to understand what you're doing makes even more challenging.

ohnobigtdawg · 09-10-2006, 05:39 PM

just change out all the fuses under your steering wheel, and take it from there.. you could have shorted something.

WHITELINES · 09-12-2006, 02:25 PM

Thanks for the feedback. Has anyone had this problem before ?? my fuses seem to be ok anything else you recommend ?? thank you

09-10-2006, 08:01 AM	#1
WHITELINES Join Date: Mar 2005 Location: MIAMI FL Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Guages Not Working Problem First, Thank You For Your Time .ok.i Recently Swapt Out My Dash From One 240 To Another .i Did This Job Well I Did It Like 3 Weeks Ago With No Problem .and Need To Swap It Back Because I Got A Good Deal On Anoher 240 But Now I Have A Problem Where My Guages Dont Work The Turn Signal's Work But My Rpm-speed-temp-gas- Dont Work And Also The Seatbelt Light Stais On As Well As The Other Lights .i've Never Had This Problem Before ..and The Weirdest Thing Is I Got The Other 240 Cluster To Check If It Was This Causing The Problem But No ..i Put Everything Together As Is ..then Put The Dash In The Other 240 After I Finished I Reconnected The Neg Battery Terminal And When I Saw The Guages Same Thing ?? What Gives.. The Clock Illuminates But No Digits The Check Engin Lights Turns On Without The Key In The Ignition ..please Help..thank You

09-10-2006, 10:30 AM	#4
Edgar Post Whore! Join Date: Oct 2004 Location: Indianapolis,IN Posts: 4,980 Trader Rating: (13) Feedback Score: 13 reviews	He would be able to help you if you would just type correctly in English. Damn I cant even understand it. Fail __________________ Drift Indy

09-10-2006, 10:58 AM	#5
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,893 Trader Rating: (73) Feedback Score: 73 reviews	1. Turn off CAPS LOCKS. 2. Learn how to capitalize properly. 3. LEARN HOW TO FUCKING PUNCUATE. 4. Learn how to properly form a statement that is legible. 5. Try to post on Zilvia again. Thank you. __________________ Best way to do business with me? Make your best offer FIRST.

09-10-2006, 05:39 PM	#9
ohnobigtdawg Zilvia Junkie Join Date: Nov 2004 Location: Cerritos CA Posts: 423 Trader Rating: (0) Feedback Score: 0 reviews	just change out all the fuses under your steering wheel, and take it from there.. you could have shorted something. __________________ MR. Pibb + Red Vines = Crazy Delicious You can call us Arron Burr by the way we droppin Hamiltons!

09-10-2006, 08:45 AM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Jesus man, learn how to type properly. I can't even begin to read that garbled mess.

09-10-2006, 10:19 AM	#3
WHITELINES Join Date: Mar 2005 Location: MIAMI FL Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	wow thanks r240na that just about fixed my problem .your the greatest .man just when i got more than plenty of problems ..all i need is some positive feedback to my issue...please.. "" THANK-YOU"" ! !

09-10-2006, 01:09 PM	#6
WHITELINES Join Date: Mar 2005 Location: MIAMI FL Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Man you guys are full of amazing help & expertise.!. ok i reconize i mispelled some words and my puncuation sucks.am 20 years old but my I.Q. is that of an 5th grader .ok am retarded.so i said it.But am doing better everyday so my doctor tells me.Back to the "original post" any "positive feed back" or ideas..please

09-10-2006, 01:12 PM	#7
SNC240SX Zilvia Junkie Join Date: Mar 2006 Location: 京都 Posts: 577 Trader Rating: (0) Feedback Score: 0 reviews	Welcome to Zilvia home of the grammar police. Try messing around with the screws in the back of the cluster i had a similar problem on my gauge and it just needed the screws in the back to be changed a little

09-10-2006, 05:19 PM	#8
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Check ECU harness and front left fender harness. Diagnosing electrical gremlins are the worst kind, and not being able to understand what you're doing makes even more challenging.

09-12-2006, 02:25 PM	#10
WHITELINES Join Date: Mar 2005 Location: MIAMI FL Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the feedback. Has anyone had this problem before ?? my fuses seem to be ok anything else you recommend ?? thank you