KA24DE Water Pump install. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Ryencool · 09-13-2006, 07:11 PM

So I'm about to replace the water pump after installing a new koyo rad last week (go figure the pump goes out the next week). Is there a write up anywhere for this and if not would one be wanted by anyone? Seems pretty straight forward but if anyone has info I might need to know that will help please let me know. Thanks!

projectRDM · 09-13-2006, 10:02 PM

1) Remove old pump.
2) Install new pump.
3) Bleed coolant.

If you installed the radiator without issue, you don't need a writeup for the water pump.

Jung918 · 09-14-2006, 01:08 AM

Take off shroud, fan, fan clutch, then the pump.

sw20>>s14 · 09-14-2006, 02:26 AM

just make sure to tension the belt within the proper range...

kandyflip445 · 09-14-2006, 03:33 AM

Or it will go out faster than it should...

Neejay · 09-14-2006, 06:55 AM

As already stated:
- Drain coolant
- Remove belts (loosen brackets, etc.)
- Remove fan (4 small bolts)
- Remove water pump (few bolts)

It's easy.

09-13-2006, 07:11 PM	#1
Ryencool Join Date: Feb 2006 Location: Austin Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	KA24DE Water Pump install. So I'm about to replace the water pump after installing a new koyo rad last week (go figure the pump goes out the next week). Is there a write up anywhere for this and if not would one be wanted by anyone? Seems pretty straight forward but if anyone has info I might need to know that will help please let me know. Thanks!

09-14-2006, 02:26 AM	#4
sw20>>s14 Post Whore! Join Date: Jan 2005 Location: bay area Posts: 5,656 Trader Rating: (19) Feedback Score: 19 reviews	just make sure to tension the belt within the proper range... __________________ s14\| y34\| 911 gts\| exige s\| 600rr\| r3\| 250r\| 85 girlfriend

09-14-2006, 03:33 AM	#5
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 40 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	Or it will go out faster than it should... __________________ My 240 vBgarage

09-13-2006, 10:02 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	1) Remove old pump. 2) Install new pump. 3) Bleed coolant. If you installed the radiator without issue, you don't need a writeup for the water pump.

09-14-2006, 01:08 AM	#3
Jung918 Post Whore! Join Date: Oct 2003 Location: CA Posts: 3,203 Trader Rating: (2) Feedback Score: 2 reviews	Take off shroud, fan, fan clutch, then the pump.

09-14-2006, 06:55 AM	#6
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 39 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	As already stated: - Drain coolant - Remove belts (loosen brackets, etc.) - Remove fan (4 small bolts) - Remove water pump (few bolts) It's easy.