My 240's Alignment Specs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jesses240 · 09-22-2006, 07:42 PM

Ok I just thought I'd post this up for people who are curious of alignment specs.

I like to Road Race and Drift and my setup right now (beside the power levels) is perfect for it.

For Suspension/grip I have KYB AGx's with pro-kits, sparco wheels w/ kuhmo 711's I have the rears set at 6 and the fronts on 1 (one of them is stuck on setting 1 i have to get it warrentied out)

Anyways I work at a general repair independent shop in tualatin, Oregon and we have a laser alignment rack and this is the specs of how I have my car setup. if you need/want alignment and your in the Oregon area we can do it but im not sure if its ok to post the shop info... contact me through pm or e-mail if you do need something done.

All this is in Degrees btw

FRONT Left Right

Caster 6.46 6.96
Camber -1.1 -1.02
Toe .07 .06 (total is .13)

REAR Left Right

Camber -1.6 -1.61
Toe .12 .08 (total is .20)

Thurst angle is .02

Left Right
SAI 13.97 14.13

Here are the specs for a 91 240sx in case you go to a different shop to get your alignment done. It's probably about the same for other years but don't quote me on it
(Remeber all in degrees)
Both Sides
Caster 6 to 7.5
Camber -1.5 to 0
Toe .03 to .09 total .06 to .19

Camber -1.67 to -.67
Toe 0 to .19 total .00 to .38

Dousan_PG · 09-22-2006, 08:06 PM

ooh alignment thread post cool

s14 250rwhp
front:
caster tad over stock
camber -3
toe 0
rear:
camber -1.5
toe 0

s13 350rwhp
front: camber -2.75
caster: tad over stock
toe: 0

rear: camber -2
toe 0

Kaotik25 · 10-04-2006, 02:33 AM

getting my alignment done soon...thanks for the thread starter

nrg · 10-04-2006, 03:09 AM

front:
Camber: -2.4
toe: 0
caster: alittle over stock

rear:
Camber: -1.7
toe: 0

articdragon192 · 10-04-2006, 03:55 AM

Recommended by Hiro's for grip
Front:
Camber: -2
Caster: 6.5
Toe: 0

Rear: -1
Toe: sligh toe in (around .6 -.8)

What I'm runing due to no adjustable RUCA

Front:
Camber: -2
Toe: 0
Caster: 6.7

Rear: -2.3
Toe: -1.2

09-22-2006, 07:42 PM	#1
Jesses240 Leaky Injector Join Date: Aug 2006 Location: Oregon Age: 40 Posts: 74 Trader Rating: (0) Feedback Score: 0 reviews	My 240's Alignment Specs Ok I just thought I'd post this up for people who are curious of alignment specs. I like to Road Race and Drift and my setup right now (beside the power levels) is perfect for it. For Suspension/grip I have KYB AGx's with pro-kits, sparco wheels w/ kuhmo 711's I have the rears set at 6 and the fronts on 1 (one of them is stuck on setting 1 i have to get it warrentied out) Anyways I work at a general repair independent shop in tualatin, Oregon and we have a laser alignment rack and this is the specs of how I have my car setup. if you need/want alignment and your in the Oregon area we can do it but im not sure if its ok to post the shop info... contact me through pm or e-mail if you do need something done. All this is in Degrees btw FRONT Left Right Caster 6.46 6.96 Camber -1.1 -1.02 Toe .07 .06 (total is .13) REAR Left Right Camber -1.6 -1.61 Toe .12 .08 (total is .20) Thurst angle is .02 Left Right SAI 13.97 14.13 Here are the specs for a 91 240sx in case you go to a different shop to get your alignment done. It's probably about the same for other years but don't quote me on it (Remeber all in degrees) Both Sides Caster 6 to 7.5 Camber -1.5 to 0 Toe .03 to .09 total .06 to .19 Camber -1.67 to -.67 Toe 0 to .19 total .00 to .38

09-22-2006, 08:06 PM	#2
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 46 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	ooh alignment thread post cool s14 250rwhp front: caster tad over stock camber -3 toe 0 rear: camber -1.5 toe 0 s13 350rwhp front: camber -2.75 caster: tad over stock toe: 0 rear: camber -2 toe 0 __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

10-04-2006, 03:09 AM	#4
nrg Zilvia FREAK! Join Date: Mar 2004 Location: CA Age: 40 Posts: 1,571 Trader Rating: (1) Feedback Score: 1 reviews	front: Camber: -2.4 toe: 0 caster: alittle over stock rear: Camber: -1.7 toe: 0 __________________ driftingisgay.com

10-04-2006, 02:33 AM	#3
Kaotik25 Zilvia Junkie Join Date: Aug 2006 Location: SoCal Age: 40 Posts: 332 Trader Rating: (0) Feedback Score: 0 reviews	getting my alignment done soon...thanks for the thread starter

10-04-2006, 03:55 AM	#5
articdragon192 Post Whore! Join Date: Jan 2005 Location: West covina Age: 39 Posts: 6,792 Trader Rating: (9) Feedback Score: 9 reviews	Recommended by Hiro's for grip Front: Camber: -2 Caster: 6.5 Toe: 0 Rear: -1 Toe: sligh toe in (around .6 -.8) What I'm runing due to no adjustable RUCA Front: Camber: -2 Toe: 0 Caster: 6.7 Rear: -2.3 Toe: -1.2