![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() |
i have some diagrams from heavy throttle's web site but the colors on the wires are not the same and i think there diagram is for wiring up a 89 to 90 240 not a 91. please help if you have any info on this or know where i can get some info thanks.
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Zilvia Member
![]() |
one other thing is on the end of my sr20 harness there are 3 plugs that plug in to the sr20 fuse box in the engine bay that are not on my 240sx fuse box. every thing i read doesn't say anything but to use my 240 fuse box. but were does the 3 plugs go to then?
|
![]() |
![]() |
![]() |
#3 |
Leaky Injector
|
There are 3 plugs mounted to the inner fender, right next to the battery. You will have to switch some wires around. I have a 92 and the wire colors should be the same as yours. I just followed the FAQ's on heavy throttle. Good luck.
Rudy |
![]() |
![]() |
![]() |
#4 |
Zilvia Member
![]() |
i understand that but on the other side there are 3 plugs that pluged in to the fuse box from the sr but my fuse box does not have a spot to plug in to. the side that the fuse box i'm talking about is the drivers side. what do i do? :!:
|
![]() |
![]() |
![]() |
Bookmarks |
|
|