SR oil pan questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jdkruger4 · 07-23-2002, 01:41 PM

Alright the SR im probly gonna buy has been sitting on its oil pan and it is bent in about 1/4". So its gonna need a new one. Where can i get one? All i can find are $300 aftermarket ones, but i just want a stock one. Can they be the same as the sentra's SR20DE oil pan? Thanks

Starlin · 07-23-2002, 02:32 PM

I would seriously doubt that it would be the same oilpan, the sentra being a Front wheel drive car and all.

As for the bend in your pan, is it on a corner? Is it creased? Did it cause a crack? You may be able to just knock the bend out with a rubber mallet.

Starlin

*sykikchimp* · 07-23-2002, 03:28 PM

If you can't bang the dent out, then I would check with SRswap.com, or one of those type of importers and see if they have some laying around or they can get you one..

1/4" doesn't sound bad though.  You should be able to bang that out.

halyoder · 07-23-2002, 03:39 PM

i bought a factor one from heavy throttle and i just put it on the other it's great.

07-23-2002, 01:41 PM	#1
jdkruger4 Leaky Injector Join Date: Oct 2001 Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	Alright the SR im probly gonna buy has been sitting on its oil pan and it is bent in about 1/4". So its gonna need a new one. Where can i get one? All i can find are $300 aftermarket ones, but i just want a stock one. Can they be the same as the sentra's SR20DE oil pan? Thanks __________________ stock '91 240sx, black, LE w/ 90k miles, and high performance spoiler rust that was poorly "fixed"

07-23-2002, 02:32 PM	#2
Starlin Leaky Injector Join Date: Jul 2002 Posts: 128 Trader Rating: (0) Feedback Score: 0 reviews	I would seriously doubt that it would be the same oilpan, the sentra being a Front wheel drive car and all. As for the bend in your pan, is it on a corner? Is it creased? Did it cause a crack? You may be able to just knock the bend out with a rubber mallet. Starlin __________________ '89 240 SX: Chrome Tinted Windows/5 speed '67 Ford Fairlane: Edlebrock:RPM Intake/Cam & Lifters/750cfm Carb/Alum. Heads/Alum. Valve Covers/Alum. Air Filter, Hooker Headers, Griffen Alum. Radiator, Mallory Ignition Sys, 9mm Ford Racing Wires, Flowmaster Exhaust + misc = 560hp/12.6 sec 1/4 Mile

07-23-2002, 03:28 PM	#3
sykikchimp WOW addicted Join Date: Dec 2001 Location: the moon Age: 44 Posts: 6,525 Trader Rating: (0) Feedback Score: 0 reviews	If you can't bang the dent out, then I would check with SRswap.com, or one of those type of importers and see if they have some laying around or they can get you one.. 1/4" doesn't sound bad though.  You should be able to bang that out. __________________

07-23-2002, 03:39 PM	#4
halyoder Zilvia Member Join Date: Mar 2002 Location: ohio Age: 44 Posts: 266 Trader Rating: (0) Feedback Score: 0 reviews	i bought a factor one from heavy throttle and i just put it on the other it's great. __________________ www.zerolift.com