![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Leaky Injector
![]() |
It's leaking when the car is standing still, and on a flat surface. I cant pinpoint out the leak, but it looks like it's coming from the upper right corners (if you are looking from the rear, and picturing a schematic drawing) of the fuel tank. I cant determine where the leak is...How hard is it to replace the fuel tank? How dangerous is it too drive around in this current condition?
Pls help...suggestions? thanks! |
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Married to the Mob
![]() |
You probably dont' wanna drive around with it just for the sake of chances that you'll ignite a spark or something and then you're pretty much done.
To remove it, first release the pressure in the gas lines. You can do this by removing the fuse for your fuel pump and then turning the key until you hear your crank turn a few times. Then lift your car up, remove all the shields and voila. Should be simple from there on. Try to do it with the tank as low on gas as possible, just for the convenience. Check pump pressure while at it. |
![]() |
![]() |
![]() |
#3 |
Nissanaholic!
![]() |
Hey dood you probably don't want to be driving like that or you could blow up or something. . .
yeah, that'd suck. . . Oh, and do what she said, for she knows waaaaaaaay more than you about cars.
__________________
Rowsdower saves us and saves all the world! |
![]() |
![]() |
![]() |
#4 |
Leaky Injector
![]() |
SPARK+GAS=FIRE
FIRE+CAR=BOOM BOOM=$$$
__________________
'89 240 SX: Chrome Tinted Windows/5 speed '67 Ford Fairlane: Edlebrock:RPM Intake/Cam & Lifters/750cfm Carb/Alum. Heads/Alum. Valve Covers/Alum. Air Filter, Hooker Headers, Griffen Alum. Radiator, Mallory Ignition Sys, 9mm Ford Racing Wires, Flowmaster Exhaust + misc = 560hp/12.6 sec 1/4 Mile |
![]() |
![]() |
![]() |
Bookmarks |
|
|