SR help: Picking a fuel rail? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

onesicklambo · 03-08-2007, 03:11 PM

hello,
I am having a bit of a trouble. I have a s13 blacktop with greddy intake mani, RC injectors and Sard topfeed fuel rail. My hood is hitting my fuel rail and will not close! Can someone recomend me a good FUel rail, injector combo that will sit LOWER??
heres what I have now;

Can anyone suggest a smaller injector(size not CC) and fuel rail combo I can put on there? I am about 1" too high!! Help would be much appreciated!!!

hahahahaha · 03-08-2007, 03:15 PM

i dont know but very clean bay!!!!!!!!!! nice keep up the good work ! and hope u find what ur looking for

sr20boostn20 · 03-08-2007, 03:29 PM

i am running the sard rail with sard injectors and i clear my hood,

slow_sr20 · 03-08-2007, 03:36 PM

Quote:

Originally Posted by sr20boostn20

i am running the sard rail with sard injectors and i clear my hood,

looks like he's got a 510 (or something) not an s-chassis car.
as for poster of this thread-looks like you may have to stick with side feeds> maybe more info?

Inland180 · 03-08-2007, 03:37 PM

Your problem is the car! just cut the hood!! haha jk. I would think all top feed fuel rails would sit at the same height.

sr20boostn20 · 03-08-2007, 04:15 PM

yes i noticed that the chassis was different, but looking at my setup with the sard injectors it does look like it sits a little bit lower, i just went out and measured it form the top of the oil cap to the top foward corner of the rail its about an 1 1/8 inches with the sard injectors

DJ_Sunrise · 03-08-2007, 05:17 PM

nice bay, looks realy clean.. but damn that shit pokes out so much.. are s13 engines angled that much or something? im pretty sure an engines supposed to sit level haha

leonb2004 · 03-08-2007, 05:46 PM

Youve never looked at a SR or RB then. We gots that gangsta lean!
I know our motors sit cocked kinda sideways, but yours looks like its sitting higher in the front than the back.

Is an aftermarket hood out of the equation? Maybe some engine mount modifications?

onesicklambo · 03-08-2007, 06:05 PM

thanks guys..
ya its a datsun 510 sorry I didnt specify. THe motor looks slanted down becasue I dont think I have the tranny x member tightened. thanks for the responses

steve shadows · 03-08-2007, 06:59 PM

jzzzs there are so many useless posts in this threads...

First of all bolt the tranny and mounts and everything else in properly to really get a full idea of how the engine will finally rest/angle, hieght etc.

If you still have the issue...

is there anyway to mess with the AN fitting that goes to your fuel pressure regulator to give your more clearence?

How about propping the hood up jdm/cowl steyl with giant bolts and washers (i so gay huh?).

I mean you can go back to a stock side feed rail with PE 850cc injectors or any other size for that matter. Judging by the compressor housing I doubt youll need more than 800cc regardless of what comp is stuffed in there, then just shelve your SARD stuff or sell it me in a month haha.

cheers man.

forum04pl · 03-08-2007, 09:17 PM

good to see you on zilvia, im so used to seeing the thread in evom haha

onesicklambo · 03-10-2007, 06:00 PM

can anyone tell me what fuel rail this is???

rps13drift · 03-10-2007, 07:57 PM

^It looks like a border fuel rail wich they sell with a 850cc injectors/ rail combo to me but ive never seen it in red only blue!
as for rails im running an ams/turbo240 rail with precision injectors and i have no hood clearence issues on an s13

Atljunglist · 03-10-2007, 08:53 PM

Quote:

Originally Posted by rps13drift

as for rails im running an ams/turbo240 rail with precision injectors and i have no hood clearence issues on an s13

its for a Datsun 510 not an S13

03-08-2007, 03:11 PM	#1
onesicklambo Leaky Injector Join Date: Sep 2006 Location: norcal Age: 38 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	SR help: Picking a fuel rail? hello, I am having a bit of a trouble. I have a s13 blacktop with greddy intake mani, RC injectors and Sard topfeed fuel rail. My hood is hitting my fuel rail and will not close! Can someone recomend me a good FUel rail, injector combo that will sit LOWER?? heres what I have now; Can anyone suggest a smaller injector(size not CC) and fuel rail combo I can put on there? I am about 1" too high!! Help would be much appreciated!!!

03-08-2007, 03:37 PM	#5
Inland180 Nissanaholic! Join Date: Jan 2004 Location: Southern Cali Posts: 1,763 Trader Rating: (21) Feedback Score: 21 reviews	Your problem is the car! just cut the hood!! haha jk. I would think all top feed fuel rails would sit at the same height. __________________ PTE6262 Full-Race Twin Scroll FTW! Feedback LINK

03-08-2007, 06:59 PM	#10
steve shadows Post Whore! Join Date: Aug 2003 Location: LA and OC Posts: 8,202 Trader Rating: (5) Feedback Score: 5 reviews	jzzzs there are so many useless posts in this threads... First of all bolt the tranny and mounts and everything else in properly to really get a full idea of how the engine will finally rest/angle, hieght etc. If you still have the issue... is there anyway to mess with the AN fitting that goes to your fuel pressure regulator to give your more clearence? How about propping the hood up jdm/cowl steyl with giant bolts and washers (i so gay huh?). I mean you can go back to a stock side feed rail with PE 850cc injectors or any other size for that matter. Judging by the compressor housing I doubt youll need more than 800cc regardless of what comp is stuffed in there, then just shelve your SARD stuff or sell it me in a month haha. cheers man. __________________ Like Me on FaceBook !

03-10-2007, 07:57 PM	#13
rps13drift Zilvia FREAK! Join Date: Oct 2006 Location: NJ BRO!!!! Age: 39 Posts: 1,194 Trader Rating: (6) Rides Gallery: rps13drift Feedback Score: 6 reviews	^It looks like a border fuel rail wich they sell with a 850cc injectors/ rail combo to me but ive never seen it in red only blue! as for rails im running an ams/turbo240 rail with precision injectors and i have no hood clearence issues on an s13 __________________ http://allies-drift.blogspot.com/

03-08-2007, 03:15 PM	#2
hahahahaha Zilvia Junkie Join Date: Jun 2006 Location: Califonia Posts: 448 Trader Rating: (0) Feedback Score: 0 reviews	i dont know but very clean bay!!!!!!!!!! nice keep up the good work ! and hope u find what ur looking for

03-08-2007, 03:29 PM	#3
sr20boostn20 Zilvia Junkie Join Date: Nov 2006 Location: Lake Tahoe, CA/ LI NY Age: 38 Posts: 425 Trader Rating: (1) Feedback Score: 1 reviews	i am running the sard rail with sard injectors and i clear my hood,

03-08-2007, 04:15 PM	#6
sr20boostn20 Zilvia Junkie Join Date: Nov 2006 Location: Lake Tahoe, CA/ LI NY Age: 38 Posts: 425 Trader Rating: (1) Feedback Score: 1 reviews	yes i noticed that the chassis was different, but looking at my setup with the sard injectors it does look like it sits a little bit lower, i just went out and measured it form the top of the oil cap to the top foward corner of the rail its about an 1 1/8 inches with the sard injectors

03-08-2007, 05:17 PM	#7
DJ_Sunrise Zilvia FREAK! Join Date: Feb 2004 Location: NJ Age: 38 Posts: 1,134 Trader Rating: (1) Feedback Score: 1 reviews	nice bay, looks realy clean.. but damn that shit pokes out so much.. are s13 engines angled that much or something? im pretty sure an engines supposed to sit level haha

03-08-2007, 05:46 PM	#8
leonb2004 Leaky Injector Join Date: Feb 2005 Location: AL Posts: 71 Trader Rating: (0) Feedback Score: 0 reviews	Youve never looked at a SR or RB then. We gots that gangsta lean! I know our motors sit cocked kinda sideways, but yours looks like its sitting higher in the front than the back. Is an aftermarket hood out of the equation? Maybe some engine mount modifications?

03-08-2007, 06:05 PM	#9
onesicklambo Leaky Injector Join Date: Sep 2006 Location: norcal Age: 38 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	thanks guys.. ya its a datsun 510 sorry I didnt specify. THe motor looks slanted down becasue I dont think I have the tranny x member tightened. thanks for the responses

03-08-2007, 09:17 PM	#11
forum04pl Zilvia Junkie Join Date: Aug 2006 Location: boston Posts: 573 Trader Rating: (10) Feedback Score: 10 reviews	good to see you on zilvia, im so used to seeing the thread in evom haha

03-10-2007, 06:00 PM	#12
onesicklambo Leaky Injector Join Date: Sep 2006 Location: norcal Age: 38 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	can anyone tell me what fuel rail this is???