**HELP ME** S13 brakes fucked up - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

slow40sx · 03-08-2010, 11:33 PM

Ok so, i drive an 89 240sx, i have 300zx brakes up front and stock brakes in the rear, recently my 300zx master cylinder started pissing fluid from between the master cylinder and the booster, i bought a new s13 240sx master cylinder and installed it, bled all the calipers until solid stream of brake fluid came out, all was well, drove it around the block, brakes felt squishy and terrible, pulled the car back in, jacked up the rear, pumped the pedal up and cracked the bleeder on the rear left, and nothing comes out, no fluid, no air, no sound, no nothing, took the bleeder screw out, still nothing, nothing came out of either side on the rear and the pedal DID NOT depress, I am completely fucking lost, would someone kindly help me out? thank you in advance

03-08-2010, 11:33 PM	#1
slow40sx Nissanaholic! Join Date: Jul 2007 Location: Virginia Beach Posts: 1,979 Trader Rating: (3) Feedback Score: 3 reviews	HELP ME S13 brakes fucked up Ok so, i drive an 89 240sx, i have 300zx brakes up front and stock brakes in the rear, recently my 300zx master cylinder started pissing fluid from between the master cylinder and the booster, i bought a new s13 240sx master cylinder and installed it, bled all the calipers until solid stream of brake fluid came out, all was well, drove it around the block, brakes felt squishy and terrible, pulled the car back in, jacked up the rear, pumped the pedal up and cracked the bleeder on the rear left, and nothing comes out, no fluid, no air, no sound, no nothing, took the bleeder screw out, still nothing, nothing came out of either side on the rear and the pedal DID NOT depress, I am completely fucking lost, would someone kindly help me out? thank you in advance __________________