R33 Gauge Cluster in S14

[Dopefish]

I attempted to do this installation via the guide listed on NICO.

http://img.photobucket.com/albums/v2...s14_wiring.jpg

However, there are inconsistancies with which plug, what color and the number of wires listed as well as some wires on either end (cluster or car) are not listed at all.

I currently have the following signals connected, according to the guide listed above, I also varified most of them by following the traces on the blue circuit board.

GRND (2 wires)
2P (2 wires)
IGN
FM
T/R
T/L
TM
TAM
ILL + (2 wires)
ILL - (2 wires)

...now the speedometer still does not function, and I cannot figure out why, it doesnt budge at all. Everything else seems to work wonderfully though, that I have wired up. Right now I'm just working on the gauges, the indicator lights will come next. I already adjusted my tach as well for the KA engine but the speedo still ignores me. I am thinking if dicecting my S14 cluster and using my speedo mechanism on the R33 cluster, just in case the R33 one is actually bad. Then just adjust the resistors in back to compensate for 180mph instead of 120mph.

Any ideas on why my speedo still hate me?

Car is a 95' S14 base and cluster is from a 95' R33 GTS-t

Thanks,
_Kris