Rear S15 Crossmember vs. S13 Crossmember - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Behind Horizon · 05-04-2007, 03:24 AM

Hello guys,

it seems to be common to swap the original rear S13 subframe and install an S15 one in Japan.

Which are the benefits of the S15 crossmember over the S13 and why shops in Japan do this ?

My opinion is if you put the parts stated below on each subframe, both will perform nearly identical, or am i wrong ?

- Kazama Upper (Camber) and Toe Control Arms Kit
- Kazama Rear Traction Rods S13
- Good Sway Bars
- Aluminium Subframe Bushings
- Polyurethan bushings for knuckles

Looking forward for replys.

Greets

BH

05-04-2007, 03:24 AM	#1
Behind Horizon Zilvia Member Join Date: Dec 2006 Location: Germany / Black Forest Posts: 164 Trader Rating: (0) Feedback Score: 0 reviews	Rear S15 Crossmember vs. S13 Crossmember Hello guys, it seems to be common to swap the original rear S13 subframe and install an S15 one in Japan. Which are the benefits of the S15 crossmember over the S13 and why shops in Japan do this ? My opinion is if you put the parts stated below on each subframe, both will perform nearly identical, or am i wrong ? - Kazama Upper (Camber) and Toe Control Arms Kit - Kazama Rear Traction Rods S13 - Good Sway Bars - Aluminium Subframe Bushings - Polyurethan bushings for knuckles Looking forward for replys. Greets BH Last edited by Behind Horizon; 05-05-2007 at 07:30 AM..