Blower actuator now working?

[Harbe]

My blower actuator "mode door actuator" is not working ie changing the blower air to feet/face/window etc, so far i have changed out the climate control, the actuator, im not getting power at the actuator and was unable to find a W/D for it does anyone have any other ideas to T/S this problem before i rip the dash out to chase wires

thanks

[g6civcx]

Year/make/model please.

[Harbe]

duh me, sorry its a 92 240sx se

[g6civcx]

Check that the mode door motor harness is actually plugged in. You can see it next to the throttle pedal. You don't need to pull the dash to see it. Make sure the harness is in tight.

Check all your fuses underdash and underhood.

Does your blower motor work? What about the temperature control? Does it light up? Do the buttons do anything?

[Harbe]

Originally Posted by g6civcx

Check that the mode door motor harness is actually plugged in. You can see it next to the throttle pedal. You don't need to pull the dash to see it. Make sure the harness is in tight.

Check all your fuses underdash and underhood.

Does your blower motor work? What about the temperature control? Does it light up? Do the buttons do anything?

it seems like one day i went to drive the car and noticed the blower was stuck on face mode, the blower works normaly, i checked for power at the mode door actuator and im not getting 12v, fuses are all good everything is pluged in.

[alilvietboi4u]

i got the same exact problem! i cant figure it out... i got a 95 se keep me updated if you find a solution

[Harbe]

yeah i posted in your other post haha

[Harbe]

Originally Posted by alilvietboi4u

i got the same exact problem! i cant figure it out... i got a 95 se keep me updated if you find a solution

I was looking into it too deep, i fixed mine, its the 10A fuse drivers side panel called "air con"