Manual Swap Price - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Thorpedo · 01-07-2002, 03:53 PM

I was quoted a price of 900(tops) for the auto-manual swap. I trust the guy because he is a good friend of one of my good friends.  I was just wondering if this would be the normal cost or if someone around here would do it for cheaper.

Thorpedo · 01-07-2002, 08:24 PM

anyone?!?!?!?

Nismos14 · 01-07-2002, 08:46 PM

thats a good price, if it includes all the parts.

geeaj · 01-07-2002, 09:08 PM

That is a good price for labor. Parts is around 400-700 using used parts.

geeaj · 01-07-2002, 09:09 PM

Let me know how it goes, I am planning on doing a swap soon too.

Thorpedo · 01-07-2002, 10:20 PM

That price is for EVERYTHING...if anyone else is interested in contacting this guy, i can give you his contact information...Just for some info...he has a sr20det'd 240 that he autocrosses and has done many swaps into many different cars.

Nismos14 · 01-07-2002, 10:38 PM

where are u located??

Thorpedo · 01-07-2002, 11:00 PM

I live in SW ohio but the guy lives in VA, near roanoke

*DSC* · 01-07-2002, 11:28 PM

Hrm, he's about an hour from me, thats cool. Maybe in a couple years I'll look up this post and give him a call.
Edit: for the SR, I have a 5spd

(Edited by DSC at 11:29 pm on Jan. 7, 2002)

drift freaq · 01-08-2002, 07:29 PM

well If your in Cali I can get you all the parts without the clutch for $475 and I have a guy that owns a Transmission shop that can install for $250-$300.  

alchemist · 01-08-2002, 07:49 PM

Install is more complicated than just swaping two manual transmission....you have to add a master and slave cylinder, clutch mounts etc.....if you can find someone to do it for 200-300 that is way way to low for a conversion

drift freaq · 01-09-2002, 12:37 PM

alchemist disbelievingly writess....
Install is more complicated than just swaping two manual transmission....you have to add a master and slave cylinder, clutch mounts etc.....if you can find someone to do it for 200-300 that is way way to low for a conversion .
___________________

HAHAHAHAHAHAHA . slave is mounted on the tranny . brackets already exist for clutch lines. the inside drivers firewall already has the guides in place for the bolts for the clutch master, just have to drill them. Also the outline for the hole for your clutch master is there you just drill, cut and hang clutch pedal. Brake pedal, the easiest thing to do is just cut down the size of the auto brake pedal to the size of a manual with a dremel tool.

That part is easy to do on your own because its just time not grunt work.
I can get all the grunt work done at my friends transmission shop in Commerce for $250 done!!! go ahead and doubt me thats fine . I am doing it and he would do it for other people and he has quite a bit of auto to manual swap experience . PLus he installed an RB25 into a 95 240sx . #### clean job too!. His work is top knotch and this is Socal labor is cheap . Yes i can sell all the parts needed including clutch and slave and pedals for $475.  

NoTuchn · 01-09-2002, 02:39 PM

thats about 3 hours from where i live, i would really be interested about contacting that guy come this summer (gimme some time to save some more money). ive thought about that swap for a long time now, and am excited to hear someone else is doin to close by.  please keep us all updated on how that goes, if it works out well for you, id be even more interested. that does sounds like a very reasonable price!  id love some more info. thanks so much, <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

Nismos14 · 01-09-2002, 04:21 PM

yeah thats an incredible price so i hope it works out for u virginia thats not TOO far from nj <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> road trip <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

geeaj · 01-09-2002, 07:29 PM

drift (dave),

Since you got the hookup on the install labor, I may just drive down and pay you a visit this summer.

Jackson

01-07-2002, 03:53 PM	#1
Thorpedo Zilvia Junkie Join Date: Nov 2001 Location: Southwest ohio Age: 39 Posts: 314 Trader Rating: (0) Feedback Score: 0 reviews	I was quoted a price of 900(tops) for the auto-manual swap. I trust the guy because he is a good friend of one of my good friends.  I was just wondering if this would be the normal cost or if someone around here would do it for cheaper.

01-07-2002, 08:24 PM	#2
Thorpedo Zilvia Junkie Join Date: Nov 2001 Location: Southwest ohio Age: 39 Posts: 314 Trader Rating: (0) Feedback Score: 0 reviews	anyone?!?!?!?

01-07-2002, 08:46 PM	#3
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 44 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	thats a good price, if it includes all the parts.

01-07-2002, 09:08 PM	#4
geeaj Zilvia Junkie Join Date: Dec 2001 Posts: 357 Trader Rating: (0) Feedback Score: 0 reviews	That is a good price for labor. Parts is around 400-700 using used parts.

01-07-2002, 09:09 PM	#5
geeaj Zilvia Junkie Join Date: Dec 2001 Posts: 357 Trader Rating: (0) Feedback Score: 0 reviews	Let me know how it goes, I am planning on doing a swap soon too.

01-07-2002, 10:20 PM	#6
Thorpedo Zilvia Junkie Join Date: Nov 2001 Location: Southwest ohio Age: 39 Posts: 314 Trader Rating: (0) Feedback Score: 0 reviews	That price is for EVERYTHING...if anyone else is interested in contacting this guy, i can give you his contact information...Just for some info...he has a sr20det'd 240 that he autocrosses and has done many swaps into many different cars.

01-07-2002, 10:38 PM	#7
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 44 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	where are u located??

01-07-2002, 11:00 PM	#8
Thorpedo Zilvia Junkie Join Date: Nov 2001 Location: Southwest ohio Age: 39 Posts: 314 Trader Rating: (0) Feedback Score: 0 reviews	I live in SW ohio but the guy lives in VA, near roanoke

01-07-2002, 11:28 PM	#9
DSC New Title Join Date: Aug 2001 Location: VA Posts: 3,454 Trader Rating: (0) Feedback Score: 0 reviews	Hrm, he's about an hour from me, thats cool. Maybe in a couple years I'll look up this post and give him a call. Edit: for the SR, I have a 5spd (Edited by DSC at 11:29 pm on Jan. 7, 2002)

01-08-2002, 07:29 PM	#10
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	well If your in Cali I can get you all the parts without the clutch for $475 and I have a guy that owns a Transmission shop that can install for $250-$300.

01-08-2002, 07:49 PM	#11
alchemist Zilvia Member Join Date: Oct 2001 Posts: 192 Trader Rating: (0) Feedback Score: 0 reviews	Install is more complicated than just swaping two manual transmission....you have to add a master and slave cylinder, clutch mounts etc.....if you can find someone to do it for 200-300 that is way way to low for a conversion

01-09-2002, 12:37 PM	#12
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,564 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	alchemist disbelievingly writess.... Install is more complicated than just swaping two manual transmission....you have to add a master and slave cylinder, clutch mounts etc.....if you can find someone to do it for 200-300 that is way way to low for a conversion . ___________________ HAHAHAHAHAHAHA . slave is mounted on the tranny . brackets already exist for clutch lines. the inside drivers firewall already has the guides in place for the bolts for the clutch master, just have to drill them. Also the outline for the hole for your clutch master is there you just drill, cut and hang clutch pedal. Brake pedal, the easiest thing to do is just cut down the size of the auto brake pedal to the size of a manual with a dremel tool. That part is easy to do on your own because its just time not grunt work. I can get all the grunt work done at my friends transmission shop in Commerce for $250 done!!! go ahead and doubt me thats fine . I am doing it and he would do it for other people and he has quite a bit of auto to manual swap experience . PLus he installed an RB25 into a 95 240sx . #### clean job too!. His work is top knotch and this is Socal labor is cheap . Yes i can sell all the parts needed including clutch and slave and pedals for $475.

01-09-2002, 02:39 PM	#13
NoTuchn Leaky Injector Join Date: Nov 2001 Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	thats about 3 hours from where i live, i would really be interested about contacting that guy come this summer (gimme some time to save some more money). ive thought about that swap for a long time now, and am excited to hear someone else is doin to close by.  please keep us all updated on how that goes, if it works out well for you, id be even more interested. that does sounds like a very reasonable price!  id love some more info. thanks so much, <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

01-09-2002, 04:21 PM	#14
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 44 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	yeah thats an incredible price so i hope it works out for u virginia thats not TOO far from nj <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> road trip <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

01-09-2002, 07:29 PM	#15
geeaj Zilvia Junkie Join Date: Dec 2001 Posts: 357 Trader Rating: (0) Feedback Score: 0 reviews	drift (dave), Since you got the hookup on the install labor, I may just drive down and pay you a visit this summer. Jackson