resistor and condenser - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

xsparc · 12-18-2007, 08:21 PM

could someone help me out and check their resistor and condensor pack for the resistor value. i think its supposed to be 2.2k but im not sure and the fsm isnt very descriptive. if you have the means could you also check the capacitance of the condenser?

xsparc · 12-18-2007, 09:06 PM

I needed to know this because i have a code 21. Come to find out i didnt even have the resistor and condenser pack, it looks like it was melted away and someone just tapped up the wires.

well i soldered in a 2.8k resistor between the lg/b and y/r wires and the code is gone now. i also used my consult software to see the cranking sig and its there too, i guess you dont really need the condenser part. i think its just there for power to the transistor for a second or 2 after the ignition is turned off.

LFOabuse · 01-10-2008, 06:33 AM

I just discovered mine is fried and melted away too. I found the part at courtesyparts.com for $5. It's listed as "Ignition Condenser" # 28351M.

I guess I'll wire the resistor in place in the mean time.

Thanks for posting the info on what resistor to use.

12-18-2007, 08:21 PM	#1
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	resistor and condenser could someone help me out and check their resistor and condensor pack for the resistor value. i think its supposed to be 2.2k but im not sure and the fsm isnt very descriptive. if you have the means could you also check the capacitance of the condenser?

01-10-2008, 06:33 AM	#3
LFOabuse Leaky Injector Join Date: Nov 2006 Location: Los Angeles Posts: 74 Trader Rating: (4) Feedback Score: 4 reviews	I just discovered mine is fried and melted away too. I found the part at courtesyparts.com for $5. It's listed as "Ignition Condenser" # 28351M. I guess I'll wire the resistor in place in the mean time. Thanks for posting the info on what resistor to use. __________________ ...

12-18-2007, 09:06 PM	#2
xsparc Zilvia Junkie Join Date: Dec 2002 Location: san diego area - esco Posts: 461 Trader Rating: (0) Feedback Score: 0 reviews	I needed to know this because i have a code 21. Come to find out i didnt even have the resistor and condenser pack, it looks like it was melted away and someone just tapped up the wires. well i soldered in a 2.8k resistor between the lg/b and y/r wires and the code is gone now. i also used my consult software to see the cranking sig and its there too, i guess you dont really need the condenser part. i think its just there for power to the transistor for a second or 2 after the ignition is turned off.