code 32 problems with new EGR setup. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ZenkiKid · 01-17-2008, 10:01 AM

so lately ive been having peek a boo CEL problems when id be going around 70-75 at 3k rpm, even with a new EGR. i finally pulled the ECU to find out it was code 32.. EGR function, and now ive been having idle problems since the transducer was replaced, what can i do to fix this?

ma71supraturbo · 01-17-2008, 10:26 AM

I'm right there with ya. Will be going through this today: http://www.240sx.org/faq/articles/ecm_code_32.htm

deesz · 01-17-2008, 11:31 AM

same problem ended up being two things.
1. the hose that connects the transducer was cracked so every once in a while it was leaking.
2. the charcoal canaster had a glog going to the egr witch through a egr code...

i fixed it by blowing out the lines and replacing the hose the. the hose that connects from the transducer to the metal tubing is only about 2 inch's long and is right under the transducer..
if you want to make sure if your egr is getting vacuum turn your car on, put your hand under the egr you should be able to feel the diaphram. rev the engine and feel if it moves..if it dosnt you know its not your problem

redZENKI · 02-04-2008, 07:33 PM

Somewhat related: can a code 77 (rear o2) set off a code 32?

01-17-2008, 10:01 AM	#1
ZenkiKid Post Whore! Join Date: Nov 2005 Location: Nowhere Age: 35 Posts: 3,285 Trader Rating: (9) Feedback Score: 9 reviews	code 32 problems with new EGR setup. so lately ive been having peek a boo CEL problems when id be going around 70-75 at 3k rpm, even with a new EGR. i finally pulled the ECU to find out it was code 32.. EGR function, and now ive been having idle problems since the transducer was replaced, what can i do to fix this?

02-04-2008, 07:33 PM	#4
redZENKI Zilvia Member Join Date: Aug 2006 Location: Seattle, WA Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	Somewhat related: can a code 77 (rear o2) set off a code 32? Last edited by redZENKI; 02-04-2008 at 08:35 PM..

01-17-2008, 10:26 AM	#2
ma71supraturbo Leaky Injector Join Date: Nov 2003 Location: Chico, CA Age: 43 Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	I'm right there with ya. Will be going through this today: http://www.240sx.org/faq/articles/ecm_code_32.htm

01-17-2008, 11:31 AM	#3
deesz Leaky Injector Join Date: Nov 2007 Location: nor cal Age: 39 Posts: 110 Trader Rating: (0) Feedback Score: 0 reviews	same problem ended up being two things. 1. the hose that connects the transducer was cracked so every once in a while it was leaking. 2. the charcoal canaster had a glog going to the egr witch through a egr code... i fixed it by blowing out the lines and replacing the hose the. the hose that connects from the transducer to the metal tubing is only about 2 inch's long and is right under the transducer.. if you want to make sure if your egr is getting vacuum turn your car on, put your hand under the egr you should be able to feel the diaphram. rev the engine and feel if it moves..if it dosnt you know its not your problem