question about KA24E TO KA24DE SWAP

[hanz]

YES ive done searching and havnt found anothing im looking for.

im swaping in a early 95 de into my 89' s13.

i got everything i needed to get but i havnt read anything about the trannys.

everything DOHC im getting is from a 93' and the 93 tranny and the 95 tranny are different, talking about sensors and plugs, i got the 93 tranny harness but doesnt plug in the 95 tranny??

what have you guys done?

why hasnt anny1 had this problem? what am i doing wrong?

if u could help me ill appriciate it thank you!

[Z U L8R]

you need to use your sohc lower harness, there's no difference in the transmissions externally. s14 trannies just have a little better oiling inside them. neither one is a make or brake it, they both will do the job just fine. you need to use your sohc speed sensor, or just use the plug. it's only 2 wires for the speed sensor

you may want to get s13 dohc power steering lines, or you'll just have to bend urs a little.

rewire your dash plug, all the important wire colors match up. use your sohc dash plug. get a s13 dohc guage cluster and your tach will read.

good luck
Dave =]

[apex]

lol like 10 thread down sum 1 asked the same ?'s read it
http://www.zilvia.net/f/showthread.php?t=180117
click on links

[hanz]

Originally Posted by Z U L8R

you need to use your sohc lower harness, there's no difference in the transmissions externally. s14 trannies just have a little better oiling inside them. neither one is a make or brake it, they both will do the job just fine. you need to use your sohc speed sensor, or just use the plug. it's only 2 wires for the speed sensor

you may want to get s13 dohc power steering lines, or you'll just have to bend urs a little.

rewire your dash plug, all the important wire colors match up. use your sohc dash plug. get a s13 dohc guage cluster and your tach will read.

good luck
Dave =]

but u didnt read, i have nothing in my 89' that is sohc except for the a/c lines,ps lines etc... i have 93'chassie, engine, underdash,ecu,tranny HARNESS..
the 93' tranny harness does NOT plug in the 95 due to different sensors i guess, get it?

Originally Posted by apex

lol like 10 thread down sum 1 asked the same ?'s read it
http://www.zilvia.net/f/showthread.php?t=180117
click on links

yes dude ive read and read, doesnt show anything answering my question..

but... which one is the body harness? (chassie or interior?)

[CynCityS13]

I did the same swap n i just kept the same sohc tranny..

It seems to me all u need is 95 bottom wire harness..





n take off the power steering u dont need it.