![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Addict
![]() Join Date: Sep 2001
Location: ............
Age: 42
Posts: 602
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
well my 240 was in a accident and while it was in the shop the clutch gave out. as in gave out i mean that the petal is stuck to the bottom of the floor. when you lift it back up it just fall back down again. what could it be?
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Leaky Injector
![]() |
Check for fluid in your master cylinder. If it's empty, then you have a major leak somewhere. Your pedal falls straight to the ground already implies air in the system, so check:
Clutch Master Cylinder Clutch Slave Cylinder Clutch Lines Good luck. Tx. (Edited by tristarx at 2<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wow.gif" border="0" valign="absmiddle" alt=':0'>0 am on Dec. 24, 2001) |
![]() |
![]() |
![]() |
#3 |
Nissanaholic!
![]() Join Date: Jun 2001
Location: Broken Arrow, OK
Age: 48
Posts: 1,814
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Drift--mine did the same exact thing a few months ago. My clutch master cylinder was shot. Hopefully you just got some air in the lines, or you just have a leak, but replacing the master & slave cylinders doesn't cost too much--was $250 for mine (parts and labor & bleeding the lines & new fluid).
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
you what they said...if it's doing that you have a hydrualic leak some where...check the master cylinder out and the slave...good luck
|
![]() |
![]() |
Bookmarks |
|
|