BuddyClub Spec II Silencer Issue

[DriftSpecial180]

So i put my silencer in my exhaust today, but i had to hammer it in (I used a soft rubber mallet). The issue...? Has anyone else had a really tight silencer like this? My concern is getting it out, what should i use to get it out?

I was thinking of taking off the exhaust and hammering it back out using a long pole, but a straight pole can't make it around the bends.

[johngriff]

hahah!

My silecner shot itself out of my spec II on the freeway when the bolt "auto loosened itself"

i love that exhaust

[Full-Lock]

get sound clips up asap...i want to hear it...

[TheSquidd]

My silencer rattled from being so loose in the Spec II, then fell out from auto loosening and some jackass stole it while I turned around to pick it up.

ASpec B II muffler, tight as hell silencer. I think ASpec sells a tool for silencer removal, its kind of a rigid coat hanger, a very long pole with a hook at the end, you hook around the back of the silencer and tug on it. You can probably fasten yourself one out of some form of metal or something.


Its just a long pole with a hook at the end. Or you can do what I do and remove it with pliers on the inside of the silencer lip and tug.

[Brian]

Mine is kind of loose too.
I'm sure it will just fall out one day.
oh well.

[DriftSpecial180]

maybe i'll just take out the holding screw and do a couple full throttle runs, maybe it'll push out

Was your guys' really hard to get it too?

[johngriff]

http://video.google.com/videoplay?do...2357&q=rpsport

audio clip with music over it.

[Gilboyto]

Someone should post up a clip of the buddy club with an SR motor, or whatever that way I can hear it! Cause I dont have my motor yet so I wont know what it sounds like!

[Gilboyto]

Ive heard that one above...but I wanna hear it without tires squealin lol
That, and that annoying squeaking BOV lol

theres also these clips. But it sounds completely different which makes me think theres a diff motor or somethin, although it is turboed

http://www.youtube.com/watch?v=BAHhpi18N3A

http://www.youtube.com/watch?v=lSeUl...elated&search=

[johngriff]

oh, you want spec II on n/a ka?

There is a guy on streetfire w/ a "standing and reving" clip of his on a s14. Bone stock.

[The Riot Hero]

you may have accidentally dented the tip out of round. those exhausts are freaking AWESOME! i have them on my car, have a bunch of them in stock here at the shop too they sell fast and people are always psyched about them. they sound too good to put a silencer in hahaha.

[articdragon192]

That was an SR in the vid clip.

[Gilboyto]

Nah, I wanna hear one on a redtop SR20 lol. I can hear it in the google video one, but I wanted a clip from someone where I would know what other exhaust stuff they have, downpipe cat etc.

Originally Posted by johngriff

oh, you want spec II on n/a ka?

There is a guy on streetfire w/ a "standing and reving" clip of his on a s14. Bone stock.

[DriftSpecial180]

Originally Posted by The Riot Hero

you may have accidentally dented the tip out of round. those exhausts are freaking AWESOME! i have them on my car, have a bunch of them in stock here at the shop too they sell fast and people are always psyched about them. they sound too good to put a silencer in hahaha.

No the tip hasn't been hit. the problem is that the spec II tip tapers, from the 3" - 4" but gradually. The silencer however, its 4" all around (atleast thats what it looks like, and thats my theory on why it doesn't fit). If the silencer was tapered a little bit, i bet it would fit like a brown leather glove on OJ

[DriftSpecial180]

Originally Posted by The Riot Hero

they sound too good to put a silencer in hahaha.

I know, i immediately regret that decision

[johngriff]

that car.

Custom turbo (2560 replica)
power fc
550cc injectors
greddy down pipe
megan test pipe
random tubular mani.

yeah, the silencer sucks, and will cause enough back pressure to ruin the gaskets/exhuast wheel, LEAVE IT OUT!

[Gilboyto]

Thanks for teh specs on that car! Is it yours or something? Because I heard it a while back and only noticed that it had power fc and such fom what it stated on the vid.
Does it sound any different with a stock turbo Id assume?

[SoSideways]

Man that exhaust sounds manly.

Awesome.

I need it now.

[johngriff]

its not that much different.

the custom turbo is knicknamed the "tbor charger" after the customer we designed it for. It is essentially a 2560, yet thrust bearing, using the oem sr housings.

Yes that is me, and my old car which is Loooooong gone.

[lilredstiffy]

hey retards with shooting silencers
go to the hardware store and buy some lock washers

silencer wont go anywhere


my issue with my silencer is uhm. it burnt apart. all the padding disappeared
had planned to buy a generic ebay silencer but why spend money to make the car sound liek shit

[MavericStephenc]

i had the same issue withmy gtspec on my s14 it was funny the exhaust was like silecer f@#$ that and spat it out (never bothered with it since)

[Jah1mon]

Does anyone know the name of the song that plays towards the end of the first posted video, the video.google?

[MOUNTAINGARAGE]

I had one of these a few years ago, silencer was tight and i used a el cheapo long tip screwdriver with a bent tip to get it out...just a few yanks.

I loved it, the whole cat-back weighed like 19lbs.

btw, I had lock a lock washer and a nylon lock nut. never lost it.....If you are really worried, drill another hole and put in a pop rivit.

[SwiftS14]

my buddy club spec II silencer is hella lose on mine, it even rattles a bit durring acceleration, mine came with the nylon lock nut and i tighten it hard still rattles. i dont even use the silencer anymore.

[DriftSpecial180]

Originally Posted by lilredstiffy

hey retards with shooting silencers
go to the hardware store and buy some lock washers

Listen to this guy...big bad wolf.

You probably haven't had a spec II, but it knows that its too good for the silencer, so it spits it out...duh. Its not their fault...

[RHDintegXSI]

last time one of our friends got their silencer stuck we ended up using a hood prop to hook and pull it out haha..i know thats ghetto right there..but hey sometimes you gotta do what you gotta do

[johngriff]

Wow im a retard. That sucks.

Yeah, i made that video, thats me. LOL.

The song. It is off the Deltron 3030 album, track title "Positive Contact"

Mario C did a remix which is pretty ill.

The Deltron 3030 album, is more experimental than anything, a storytelling album, set to sci fi, with electronica constructions, yet keeping with del's very uniqe lyrical style.

"Deltron" is really, Del the Funky Homosapian, you might also know him from his work in gorrillaz.

I dont suggest using the silencer on the spec II, it tooo restrictive, and i "feel" it can cause damage.

[DriftSpecial180]

my thread is all over the place....

[Gilboyto]

Originally Posted by johngriff

Wow im a retard. That sucks.
I dont suggest using the silencer on the spec II, it tooo restrictive, and i "feel" it can cause damage.

The only "feeling" anyone will do with a silencer in is the person driving behind you when it flies out!

[Brian]

hahas John, nice to see a Deltron 3030 fan. ..... and Del in general I suppose.
Heiro!!!!