clutch pedal pressure - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

turbosx · 07-26-2008, 04:02 PM

i looked around and i can find anything regrading the same problem,
OK, i change the clutch, master and slave and i don't have any pressure on the pedal i bled the line and there is no leaks has anyone else had this problem

thanks in advance

ms!3 · 07-26-2008, 04:03 PM

you still using the stock dampener?

dino6192 · 07-26-2008, 04:07 PM

when you press in on the clutch have someone check if your slave moves at all? that way you at least know its a hydro issue. if not then it possible the clip on your TO bearing isnt on correctly, which may be causing the fork to have a entirely different angle. happened to me once.

turbosx · 07-26-2008, 04:33 PM

Quote:

Originally Posted by dino6192

when you press in on the clutch have someone check if your slave moves at all? that way you at least know its a hydro issue. if not then it possible the clip on your TO bearing isnt on correctly, which may be causing the fork to have a entirely different angle. happened to me once.

the slave moves and it picks up pressure and then it loses it, this all happend befor i change everything i went to bleed the line on the slave and it just sucked the fluid and the pedal went down i dont know if it still has air i allready used 2 cans of brake fluid

turbosx · 07-26-2008, 05:22 PM

thanks for the help i figured it out

Rayne · 07-26-2008, 05:33 PM

What was the problem?

07-26-2008, 04:02 PM	#1
turbosx Zilvia Member Join Date: Feb 2007 Location: SO CAL Posts: 213 Trader Rating: (1) Feedback Score: 1 reviews	clutch pedal pressure i looked around and i can find anything regrading the same problem, OK, i change the clutch, master and slave and i don't have any pressure on the pedal i bled the line and there is no leaks has anyone else had this problem thanks in advance __________________

07-26-2008, 04:07 PM	#3
dino6192 Zilvia Addict Join Date: May 2008 Location: California Posts: 770 Trader Rating: (8) Feedback Score: 8 reviews	when you press in on the clutch have someone check if your slave moves at all? that way you at least know its a hydro issue. if not then it possible the clip on your TO bearing isnt on correctly, which may be causing the fork to have a entirely different angle. happened to me once. __________________ Tsuiso.Style @ Instagram

07-26-2008, 05:22 PM	#5
turbosx Zilvia Member Join Date: Feb 2007 Location: SO CAL Posts: 213 Trader Rating: (1) Feedback Score: 1 reviews	thanks for the help i figured it out __________________

07-26-2008, 05:33 PM	#6
Rayne Zilvia Addict Join Date: Feb 2005 Location: Earth Posts: 676 Trader Rating: (0) Rides Gallery: Rayne Feedback Score: 0 reviews	What was the problem? __________________ Do need the Factory Service Manual? Click here.

07-26-2008, 04:03 PM	#2
ms!3 Zilvia FREAK! Join Date: Apr 2006 Location: USA Age: 35 Posts: 1,563 Trader Rating: (7) Feedback Score: 7 reviews	you still using the stock dampener?