exedy oem clutch.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gixxer103 · 07-25-2008, 01:26 AM

i installed an exedy oem clutch on my sr20det...da clutch that was in was already worn out but dis new one seems like it has less grab...the old clutch had 6springs on the clutch plate and the oem exedy had 4springs...it feel likes the old clutch had more grab even tho its smells alot...should i jus upgrade to stage 1 exedy...i have a feeling that the old one that i replaced was a worn out stage 1...can anyone give me some advice or input...

essforteen · 07-25-2008, 01:32 AM

was it used
if so theres your problem

gixxer103 · 07-25-2008, 01:40 AM

no it was a brand new clutch kit...like my first gear seems slower and all the other gears with da old clutch it got me out da hole faster but it would jus stink like shieet....i even got da flywheel resurfaced...is it cuz OEM sucks?

s13boy89 · 07-25-2008, 01:52 AM

damn i could brly understands yous

Dream240 · 07-25-2008, 09:48 AM

Well if you haven't properly broken the clutch in then your going to notice some drag in first gear. Especially on a stock clutch. The exedy OEM replacement should be good for about 205 lbs of torque, IIRC.

The stage 1 is good for up to 240-250 i think.

How much power are you laying down? That could be your problem.

gixxer103 · 07-28-2008, 01:34 PM

not that much power...its pretty much stock just k&n air cone filter and 3inch down pipe and 3 inch straight pipe...i was told that it didnt need any breaking in...with the old clutch it seems to be faster....

Dream240 · 07-28-2008, 03:39 PM

Who told you that? You should always break in a new clutch. 500 miles of baby shifting, at least.

Sounds like you glazed your friction disc already, and now it's slipping.

gixxer103 · 07-29-2008, 01:13 PM

oh man...fuck

GSXRJJordan · 07-29-2008, 01:24 PM

Quote:

Originally Posted by gixxer103

...i was told that it didnt need any breaking in

Someone lied to you. You toasted it. Get your flywheel resurfaced and buy a new disk. Or, get a real clutch, like the Exedy Stage 2 - I don't see any point to the Stage 1 (OEM replacement, the one you have) because it's not as good as OEM lol.

racepar1 · 07-29-2008, 01:31 PM

You fail miserably at sentence structure, punctuation, spelling, and grammar. To answer your question... The stage 1 exedy clutches have 4 springs just like the OE clutches. If your original clutch had 6 springs it was most likely somebody's stage2. If the clutch was stinky after use then it was bad anyways, it just probably had a firmer initial engagement because the pressure plate was more aggressive. Break in is not as important as some people make it sound, but you can't just go out and drift it right off the bat. I wouldn't worry about going 500 miles or some shit like that, just drive it normally (as in normally for a normal person) for a week or so and you will be fine.

Dream240 · 07-29-2008, 01:37 PM

Quote:

Originally Posted by GSXRJJordan

Someone lied to you. You toasted it. Get your flywheel resurfaced and buy a new disk. Or, get a real clutch, like the Exedy Stage 2 - I don't see any point to the Stage 1 (OEM replacement, the one you have) because it's not as good as OEM lol.

Not true. Exedy makes an OEM replacement and then they also make a Stage 1, 2, etc.

The OEM replacement is about $115. The stage 1 runs about $300. Stage 2 is around $450 IIRC.

And since when is an Exedy OEM replacement not as good as OEM? You're comparing it to a Nissan clutch? Sure go with a Nissan clutch, if you want to waste around $250. IMO (and I'm sure I'm not alone here) Exedy is one of the best clutches for the money.

http://www.exedyusa.com/oe/06054

http://www.exedyusa.com/oe/06805B

http://www.exedyusa.com/oe/06953A

Prices may vary.....

Oh here you go:

http://cgi.ebay.com/ebaymotors/_Car-...3756.m14.l1318

It's cheap and it'll work, bam done.

bigOdom1 · 07-29-2008, 01:44 PM

no matter the brand if not properly broken in they will not hold up. by braking in i mean at least 500 miles of CITY driving (city driving is red light to red light with lots of shifting not much boost if any). if you try to dump the clutch before that period the chances of a full life are drastically reduced in my opinion. sure if you got the money to swap them out after each run then dont break it in. Also if you want it to be done right then get the flywheels surfaced by a reputable shop. if you dont get the flywheel true and dont let the disc get properly broken in then you FAIL

gixxer103 · 07-30-2008, 02:03 AM

can i just buy the clutch disk stage 1? or would i have to buy the whole kit?im not sure if the pressure plates the same for a stage 1..i think my old one is stage 1 not stage 2..

07-25-2008, 01:26 AM	#1
gixxer103 Leaky Injector Join Date: Jan 2008 Location: west covina Age: 40 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	exedy oem clutch.. i installed an exedy oem clutch on my sr20det...da clutch that was in was already worn out but dis new one seems like it has less grab...the old clutch had 6springs on the clutch plate and the oem exedy had 4springs...it feel likes the old clutch had more grab even tho its smells alot...should i jus upgrade to stage 1 exedy...i have a feeling that the old one that i replaced was a worn out stage 1...can anyone give me some advice or input...

07-25-2008, 09:48 AM	#5
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Well if you haven't properly broken the clutch in then your going to notice some drag in first gear. Especially on a stock clutch. The exedy OEM replacement should be good for about 205 lbs of torque, IIRC. The stage 1 is good for up to 240-250 i think. How much power are you laying down? That could be your problem. __________________ Don't mess with my monkey...he's loaded.

07-28-2008, 03:39 PM	#7
Dream240 Nissanaholic! Join Date: Dec 2002 Location: Inland Empire, California Age: 46 Posts: 2,188 Trader Rating: (8) Feedback Score: 8 reviews	Who told you that? You should always break in a new clutch. 500 miles of baby shifting, at least. Sounds like you glazed your friction disc already, and now it's slipping. __________________ Don't mess with my monkey...he's loaded.

07-29-2008, 01:44 PM	#12
bigOdom1 Nissanaholic! Join Date: Nov 2005 Location: Auburn/Birmingham AL Age: 41 Posts: 1,817 Trader Rating: (4) Rides Gallery: bigOdom1 Feedback Score: 4 reviews	no matter the brand if not properly broken in they will not hold up. by braking in i mean at least *500* miles of *CITY* driving (city driving is red light to red light with lots of shifting not much boost if any). if you try to dump the clutch before that period the chances of a full life are drastically reduced in my opinion. sure if you got the money to swap them out after each run then dont break it in. Also if you want it to be done right then get the flywheels surfaced by a reputable shop. if you dont get the flywheel true and dont let the disc get properly broken in then you FAIL __________________ my car domain that good review thread

07-30-2008, 02:03 AM	#13
gixxer103 Leaky Injector Join Date: Jan 2008 Location: west covina Age: 40 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	can i just buy the clutch disk stage 1? or would i have to buy the whole kit?im not sure if the pressure plates the same for a stage 1..i think my old one is stage 1 not stage 2.. Last edited by gixxer103; 07-30-2008 at 02:04 AM.. Reason: error in item

07-25-2008, 01:32 AM	#2
essforteen Nissanaholic! Join Date: Apr 2007 Location: LAX Area (So CAL) Posts: 1,802 Trader Rating: (50) Rides Gallery: essforteen Feedback Score: 50 reviews	was it used if so theres your problem

07-25-2008, 01:40 AM	#3
gixxer103 Leaky Injector Join Date: Jan 2008 Location: west covina Age: 40 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	no it was a brand new clutch kit...like my first gear seems slower and all the other gears with da old clutch it got me out da hole faster but it would jus stink like shieet....i even got da flywheel resurfaced...is it cuz OEM sucks?

07-25-2008, 01:52 AM	#4
s13boy89 Nissanaholic! Join Date: Nov 2007 Location: anaheim Age: 35 Posts: 1,991 Trader Rating: (11) Feedback Score: 11 reviews	damn i could brly understands yous

07-28-2008, 01:34 PM	#6
gixxer103 Leaky Injector Join Date: Jan 2008 Location: west covina Age: 40 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	not that much power...its pretty much stock just k&n air cone filter and 3inch down pipe and 3 inch straight pipe...i was told that it didnt need any breaking in...with the old clutch it seems to be faster....

07-29-2008, 01:13 PM	#8
gixxer103 Leaky Injector Join Date: Jan 2008 Location: west covina Age: 40 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	oh man...fuck

07-29-2008, 01:31 PM	#10
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	You fail miserably at sentence structure, punctuation, spelling, and grammar. To answer your question... The stage 1 exedy clutches have 4 springs just like the OE clutches. If your original clutch had 6 springs it was most likely somebody's stage2. If the clutch was stinky after use then it was bad anyways, it just probably had a firmer initial engagement because the pressure plate was more aggressive. Break in is not as important as some people make it sound, but you can't just go out and drift it right off the bat. I wouldn't worry about going 500 miles or some shit like that, just drive it normally (as in normally for a normal person) for a week or so and you will be fine.