Car wont start after taking emission stuff off - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tuner92 · 08-29-2008, 09:05 PM

So I just had my head rebuilt on my ka24de, and win the head and the intake was off I took all the emission stuff off that you don’t need. And thin i put every thing back together and plugged all the vacuum lines. Thin I tried to start it and it wont start I checked timing and went back over every thing to make sure every thing is hooked up right and it still wont start. And it has spark and gas and compression.
So if anyone can give me any ideas or anything I could have missed doing.
Any help will be grate thanks andy

***FaLKoN240*** · 08-29-2008, 09:36 PM

Did you block off the EGR plate?

Also, is it cranking? Or just not starting at all?

tuner92 · 08-30-2008, 11:16 PM

yea i blocked the egr off.

And it cranks over but wont start. It also has a little backfire here and there to win it first turn the key over.

s13john · 08-30-2008, 11:28 PM

mine did this i took out the distributor and bumped the starter till it hit tdc or top dead center on compression stroke then take the cover off distributor and see were your contact is it should be turned to point towards the first cylinder then install and hope for the best sometimes you can lossen the 2 10mm bolts and rotate your distributor a little...... sorry if no help..

tuner92 · 08-31-2008, 02:32 PM

yea i tryed that aredy and iy still wont work.
but thanks for the try

08-29-2008, 09:05 PM	#1
tuner92 Leaky Injector Join Date: May 2008 Location: illinois Age: 35 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	Car wont start after taking emission stuff off So I just had my head rebuilt on my ka24de, and win the head and the intake was off I took all the emission stuff off that you don’t need. And thin i put every thing back together and plugged all the vacuum lines. Thin I tried to start it and it wont start I checked timing and went back over every thing to make sure every thing is hooked up right and it still wont start. And it has spark and gas and compression. So if anyone can give me any ideas or anything I could have missed doing. Any help will be grate thanks andy

08-29-2008, 09:36 PM	#2
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,893 Trader Rating: (73) Feedback Score: 73 reviews	Did you block off the EGR plate? Also, is it cranking? Or just not starting at all? __________________ Best way to do business with me? Make your best offer FIRST.

08-30-2008, 11:16 PM	#3
tuner92 Leaky Injector Join Date: May 2008 Location: illinois Age: 35 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	yea i blocked the egr off. And it cranks over but wont start. It also has a little backfire here and there to win it first turn the key over.

08-30-2008, 11:28 PM	#4
s13john Leaky Injector Join Date: Aug 2008 Location: kentucky Age: 35 Posts: 93 Trader Rating: (-1) Feedback Score: -1 reviews	mine did this i took out the distributor and bumped the starter till it hit tdc or top dead center on compression stroke then take the cover off distributor and see were your contact is it should be turned to point towards the first cylinder then install and hope for the best sometimes you can lossen the 2 10mm bolts and rotate your distributor a little...... sorry if no help..

08-31-2008, 02:32 PM	#5
tuner92 Leaky Injector Join Date: May 2008 Location: illinois Age: 35 Posts: 63 Trader Rating: (0) Feedback Score: 0 reviews	yea i tryed that aredy and iy still wont work. but thanks for the try