*help* HKS EVC5 need pinout

[Z U L8R]

guys i need a pic of the back of the evc 5 control unit so i can see which wire color goes where into the control head. the plug ends on this evc 5 got cut off so i bought new connectors from radio shack but i don't know what order to connect them to.

i've called hks and they only have evc6's in stock. forged only has evc 6's and nopi gave me hks's number.

IF YOU HAVE AN EVC5 CAN YOU PLEASE TAKE A PIC OF THE BACK OF YOUR CONTROL UNIT SO I CAN SEE WHICH WIRE COLOR IS ON WHICH PIN OF EACH PLUG.

thx in advance

Dave

[Z U L8R]

nvm i figured it out. gee THANKS anyways guys GAWWWWWD!

there's a 3 pin plug to the solenoid, a 4 pin to the monitor screen and a 2 pin power and ground supply.

so i figured out the power and ground for the control head

tested and found the pins with continuity to the 3 pin boost solenoid, which left only 1 possibility there aka the signal wire

and also i got continuity to the 4 pin monitor plug which only left me with 2 choices left for that one.

i had continuity from the signal wire going to the 3 pin solenoid and the 4 pin monitor, so that left me with only 1 wire left, and voila

I ROX UR SOX

Dave @ Lethal Injection
HOTT SECKS