CA FS: BREMBO Brakes! GTR & STI Brembo Brakes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

eek · 07-17-2009, 07:16 PM

Like the tittle says, I have a FRONT SET (Pair) of R33 GTR V-SPEC Skyline BREMBO Calipers. These are black in color and come loaded with used pads (still have meat on them) and Slotted rotors. These are a DIRECT BOLT ON to ANY S-CHASSIS. NO bracket or custom stuff to install. Very similar to the G35/350z brembo calipers just smaller mounting holes (so no need to re-drill your spindle). These are also BIGGER than the Sentra SE-R Spec-V Brembos which only use a skinny 22mm thick rotor.

Second, is a REAR set of STI BREMBO calipers (gold). Have all the hardware, and from what I remember its also loaded with pads. Direct bolt on if you have the Z32 rear drum assembly. These will work with Z32 rear rotors as well for a complete direct bolt on affair.

Reason for selling: I'm already running a full set of STI Brembo's on my current car. These were for my g/f's car which was sold a little while back, so I no longer have any use for these. I paid $600 for the front and $300 for the rears, I'm not trying to make any $ on this, just trying to re-coop the $ I spent.

What is needed for install?
-Brake lines- (z32 s/s conversion lines)
-Z32 Rear Drum Assembly
-Z32 rear rotors
-R33 skyline e-brake cables (if your a S14) or Z32 2+2 e-brake cables (if your a s13)
-5 lug
-Z32 brake master cylinder (Not needed, BUT HIGHLY RECOMMENDED)

Take the complete set off my hands for $900obo picked up. Located in Santa Clara, CA (Bay Area, NOR-CAL) I can ship at buyers expense(shouldn't cost more than $50 to ship), but I prefer local pick up. PM me if there are any questions.

silnismo · 07-17-2009, 07:45 PM

Great pricing!

Bump for a sweet deal.

aardvark · 07-18-2009, 02:48 AM

do the front use the same rotors as the 350z/g35 brembos? i know they're both 324x30mm, but how about hub offset?

eek · 07-21-2009, 12:46 PM

Quote:

Originally Posted by aardvark

do the front use the same rotors as the 350z/g35 brembos? i know they're both 324x30mm, but how about hub offset?

These can be used w/ the 350z/G35 Brembo rotors. It will require a 2mm washer to offset the caliper. These use the same pads as the G35/350z/Sentra SE-R brembos as well.

THROW ME SOME OFFERS! Whats the worst that can happen? I say no?

Pirate_Freder · 07-21-2009, 08:24 PM

free bump for you sir, sick brakes and if I had the extra dough I'd snatch em' up. glws

Slammed180 · 07-21-2009, 08:33 PM

Interested in just the rears.
Let me know if you'd consider splitting the set, and shipping to Canada.

lilaznjeff · 07-27-2009, 07:51 PM

im interested in the rears, located in san francisco, would pick up locally.

how much would be just the rears THANKS IN ADVANCE

07-17-2009, 07:16 PM	#1
eek Zilvia FREAK! Join Date: Feb 2004 Location: California Age: 44 Posts: 1,025 Trader Rating: (29) Feedback Score: 29 reviews	FS: BREMBO Brakes! GTR & STI Brembo Brakes Like the tittle says, I have a FRONT SET (Pair) of R33 GTR V-SPEC Skyline BREMBO Calipers. These are black in color and come loaded with used pads (still have meat on them) and Slotted rotors. These are a DIRECT BOLT ON to ANY S-CHASSIS. NO bracket or custom stuff to install. Very similar to the G35/350z brembo calipers just smaller mounting holes (so no need to re-drill your spindle). These are also BIGGER than the Sentra SE-R Spec-V Brembos which only use a skinny 22mm thick rotor. Second, is a REAR set of STI BREMBO calipers (gold). Have all the hardware, and from what I remember its also loaded with pads. Direct bolt on if you have the Z32 rear drum assembly. These will work with Z32 rear rotors as well for a complete direct bolt on affair. Reason for selling: I'm already running a full set of STI Brembo's on my current car. These were for my g/f's car which was sold a little while back, so I no longer have any use for these. I paid $600 for the front and $300 for the rears, I'm not trying to make any $ on this, just trying to re-coop the $ I spent. What is needed for install? -Brake lines- (z32 s/s conversion lines) -Z32 Rear Drum Assembly -Z32 rear rotors -R33 skyline e-brake cables (if your a S14) or Z32 2+2 e-brake cables (if your a s13) -5 lug -Z32 brake master cylinder (Not needed, BUT HIGHLY RECOMMENDED) Take the complete set off my hands for $900obo picked up. Located in Santa Clara, CA (Bay Area, NOR-CAL) I can ship at buyers expense(shouldn't cost more than $50 to ship), but I prefer local pick up. PM me if there are any questions.

07-21-2009, 08:33 PM	#6
Slammed180 Zilvia FREAK! Join Date: Oct 2007 Location: Calgary, Canada Age: 38 Posts: 1,445 Trader Rating: (1) Feedback Score: 1 reviews	Interested in just the rears. Let me know if you'd consider splitting the set, and shipping to Canada. __________________ Blow me, bitches.

07-18-2009, 02:48 AM	#3
aardvark Zilvia Junkie Join Date: Aug 2008 Location: dark smokey cafes of Bolsa, CA Age: 25 Posts: 346 Trader Rating: (22) Feedback Score: 22 reviews	do the front use the same rotors as the 350z/g35 brembos? i know they're both 324x30mm, but how about hub offset?

07-21-2009, 08:24 PM	#5
Pirate_Freder Zilvia Junkie Join Date: Mar 2007 Location: Roswell, NM Age: 37 Posts: 515 Trader Rating: (10) Feedback Score: 10 reviews	free bump for you sir, sick brakes and if I had the extra dough I'd snatch em' up. glws

07-27-2009, 07:51 PM	#7
lilaznjeff Zilvia Addict Join Date: Sep 2003 Location: oakland Age: 41 Posts: 658 Trader Rating: (2) Feedback Score: 2 reviews	im interested in the rears, located in san francisco, would pick up locally. how much would be just the rears THANKS IN ADVANCE