LED dome light and other parts not working? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mmaxeyjr · 10-12-2008, 08:31 AM

Me and a buddy made a LED dome light w/ a circuit board and solder.

I was putting in my led dome light and it flashed on for a second then it turned off instantly.

So to test if the led worked itself I touched the ground to the ground on the battery and it flashed on for a short time then off.

Now my headunit doesnt work and I also noticed the trunk lights dont turn on. And theres a humming noise when i turn the key to on.

I checked some fuses, but they all seemed good and not blown.

Any ideas?

also my automatic seatbelts wont work unless the key is in the ON position. If I turn it off and open the door the seatbelt stays back instead
of moving front.
thanks

caraz · 10-12-2008, 08:52 AM

I would check your fuse box for a blown fuse. Most likely the dome light fuse.

HTH

projectRDM · 10-12-2008, 10:46 AM

You've obviously blown a fuse. Checking some of them is pointless, check them all. Inside and out.

ex_out · 11-06-2008, 02:33 PM

Did you use resistors?

mmaxeyjr · 11-06-2008, 07:15 PM

yes problems been solved. thanks

10-12-2008, 08:31 AM	#1
mmaxeyjr Zilvia Member Join Date: Sep 2008 Location: Lancaster County Posts: 162 Trader Rating: (2) Feedback Score: 2 reviews	LED dome light and other parts not working? Me and a buddy made a LED dome light w/ a circuit board and solder. I was putting in my led dome light and it flashed on for a second then it turned off instantly. So to test if the led worked itself I touched the ground to the ground on the battery and it flashed on for a short time then off. Now my headunit doesnt work and I also noticed the trunk lights dont turn on. And theres a humming noise when i turn the key to on. I checked some fuses, but they all seemed good and not blown. Any ideas? also my automatic seatbelts wont work unless the key is in the ON position. If I turn it off and open the door the seatbelt stays back instead of moving front. thanks

10-12-2008, 10:46 AM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 50 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You've obviously blown a fuse. Checking some of them is pointless, check them all. Inside and out. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

10-12-2008, 08:52 AM	#2
caraz Join Date: Jun 2005 Location: WA Posts: 33 Trader Rating: (3) Feedback Score: 3 reviews	I would check your fuse box for a blown fuse. Most likely the dome light fuse. HTH

11-06-2008, 02:33 PM	#4
ex_out Join Date: Apr 2008 Location: montgomery, al Age: 43 Posts: 25 Trader Rating: (0) Feedback Score: 0 reviews	Did you use resistors?

11-06-2008, 07:15 PM	#5
mmaxeyjr Zilvia Member Join Date: Sep 2008 Location: Lancaster County Posts: 162 Trader Rating: (2) Feedback Score: 2 reviews	yes problems been solved. thanks