CAS wire keeps frying!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kilo64 · 12-10-2008, 04:46 PM

A friend of mines recently purchased a swapped car and is now having some electical problems.

The black wire closest to the firewall on top of the CAS plug keeps frying on the 2nd turn of the key.

Does anyone know where the blackwire goes to?

It is currently grounded on a hacked harness but I was hoping someone can lead me in the right direction from the oem harness. I can't seem to find anything in regards the fsm and the individual wires.

The harness is extremely hacked/modified. The original owner rewired all the fuses boxes and battery to the trunk.

Thanks for any input!

punxva · 12-10-2008, 05:04 PM

i would tell him to grab a new harness and work from that. you'll be finding more and more gremlins later down the line, it'd be cheaper and easier to do it once

kilo64 · 12-10-2008, 05:10 PM

Thanks for the quick reply.

Its pretty straight forward and everything is as it seems according to all the diagrams. But the one problem is that theres no diagrams that are specific enough for the wires coming out of the CAS.

Do you know where teh black wire runs back to?

GSXRJJordan · 12-10-2008, 05:27 PM

What engine/car? I'm assuming S13 with a redtop? I have a diagram that I made for the redtop upper engine harness. Please use my username when referencing this diagram.

Make sure you're giving the ECU good power and ground - the wire you're talking about is probably the +12v lead to the CAS, which could be shorted out somewhere along the harness.

kilo64 · 12-10-2008, 08:11 PM

THANK YOU FOR THE GRAPH!!!

That thing helped a ton!

Thanks everyone for the tips!

Would you happen to know the difference between a j4 and 62 ecu?

12-10-2008, 04:46 PM	#1
kilo64 Leaky Injector Join Date: Aug 2006 Location: New York Age: 37 Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	CAS wire keeps frying!!! A friend of mines recently purchased a swapped car and is now having some electical problems. The black wire closest to the firewall on top of the CAS plug keeps frying on the 2nd turn of the key. Does anyone know where the blackwire goes to? It is currently grounded on a hacked harness but I was hoping someone can lead me in the right direction from the oem harness. I can't seem to find anything in regards the fsm and the individual wires. The harness is extremely hacked/modified. The original owner rewired all the fuses boxes and battery to the trunk. Thanks for any input!

12-10-2008, 05:27 PM	#4
GSXRJJordan Post Whore! Join Date: May 2006 Location: San Diego, CA Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	What engine/car? I'm assuming S13 with a redtop? I have a diagram that I made for the redtop upper engine harness. Please use my username when referencing this diagram. Make sure you're giving the ECU good power and ground - the wire you're talking about is probably the +12v lead to the CAS, which could be shorted out somewhere along the harness. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

12-10-2008, 05:10 PM	#3
kilo64 Leaky Injector Join Date: Aug 2006 Location: New York Age: 37 Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for the quick reply. Its pretty straight forward and everything is as it seems according to all the diagrams. But the one problem is that theres no diagrams that are specific enough for the wires coming out of the CAS. Do you know where teh black wire runs back to?

12-10-2008, 08:11 PM	#5
kilo64 Leaky Injector Join Date: Aug 2006 Location: New York Age: 37 Posts: 139 Trader Rating: (0) Feedback Score: 0 reviews	THANK YOU FOR THE GRAPH!!! That thing helped a ton! Thanks everyone for the tips! Would you happen to know the difference between a j4 and 62 ecu?