CA CLEAN KA 5-speed trans - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

racepar1 · 11-16-2008, 01:30 PM

This was my original trans it came our of a 1992 s-13. I broke a shift fork at the track and bought another trans off my buddy. I ended up with another blown trans from a customer's car and decided to replace the shift forks and rod assembly. This trans is CLEAN, inside and out. NO metal inside the case and it is SUPER clean. This is probably the only time you will get to see inside the trans you are buying before you buy it. The inside is the most important part. The trans was NOT cleaned before I took the pics of it apart. It comes with the clutch fork, stock shifter, a good throwout bearing, all switches, a s-13 speed sensor, and has been re-sealed.

SOLD!

jspec240 · 11-16-2008, 02:47 PM

Fuck that thing is clean!!! Great price too.. how ya been man?

racepar1 · 11-16-2008, 02:59 PM

Quote:

Originally Posted by jspec240

Fuck that thing is clean!!! Great price too.. how ya been man?

Thanks, I'll PM you to chat though.

brett-hancock · 11-16-2008, 03:48 PM

Bout how many miles are on it???

racepar1 · 11-16-2008, 03:52 PM

It has about 180k on it, but I am almost certain it has been re-built. I see paint markings all over the place inside the trans that were not in the donor trans that I stole the shift forks and rods from. No grinding or weird noises at all in the 4 years I was using it for.

Wookie384 · 11-16-2008, 04:47 PM

I've driven his car when this transmisson was installed and it as smooth as a hot knife through butter. Someone buy it...

24096 · 11-16-2008, 04:58 PM

so you took the old fork off of the other trans and put it on this one? so its not a new fork... hmmmm i might be interested in purchasing this...

racepar1 · 11-16-2008, 05:04 PM

I replaced all the shift forks and rods with a set from another trans that shifted and drove fine, it just had a grinding noise on decel in the donor trans. When I pulled THIS trans out of the car it wouldn't go into 5th or reverse and it was hard to get into 3rd and 4th. It now shifts like butter.

Screenname · 11-16-2008, 05:09 PM

Bump for Aron and a good deal on a trans. Might have to get this just in case I blow my tranny doing stupid stuff, haha.

racepar1 · 11-16-2008, 05:13 PM

Quote:

Originally Posted by Screenname

Bump for Aron and a good deal on a trans. Might have to get this just in case I blow my tranny doing stupid stuff, haha.

Stoopid stuff is fun! LOL!

jbretz · 11-17-2008, 08:18 AM

man than thing is mint too bad your in cali. i woulda bought this in a heartbeat. gl on the sale

racepar1 · 11-18-2008, 09:42 AM

Bump #1 msglngth

Oo_Skyline_oO · 11-18-2008, 10:06 AM

what condition is the throw out bearing??? can you take 150 withought fork and shifter?? where are you located??

racepar1 · 11-18-2008, 11:40 AM

Quote:

Originally Posted by Oo_Skyline_oO

what condition is the throw out bearing??? can you take 150 withought fork and shifter?? where are you located??

Hmmmm, I'll PM you. Didn't you come to my shop to buy some parts from Dave?

SochBAT · 11-18-2008, 11:52 AM

Thats a damn good deal.

I just frankensteined my tranny SR w/ KA bellhousing, and i didn't get it as remotely clean as yours.

Shit. How much degreaser did you use?!?!

racepar1 · 11-18-2008, 02:49 PM

I cleaned the case in a solvent tank while it was apart. you would have to use a lot of simple green and scrub the hell out of it to get it this clean with degreaser and a pressure washer.

11-16-2008, 02:47 PM	#2
jspec240 Nissanaholic! Join Date: Nov 2007 Location: SIN CAL Age: 43 Posts: 2,096 Trader Rating: (19) Rides Gallery: jspec240 Feedback Score: 19 reviews	Fuck that thing is clean!!! Great price too.. how ya been man? __________________ DREW SLIDE TO SIDE WORLD WIDE Feedback!! http://www.zilvia.net/f/showthread.php?t=182673 661 sliders Gymkhana @ buttonwillow http://zilvia.net/f/south-western-st...-sessions.html >> Bakersfield Hook up thread <<

11-16-2008, 01:30 PM	#1
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	CLEAN KA 5-speed trans This was my original trans it came our of a 1992 s-13. I broke a shift fork at the track and bought another trans off my buddy. I ended up with another blown trans from a customer's car and decided to replace the shift forks and rod assembly. This trans is CLEAN, inside and out. NO metal inside the case and it is SUPER clean. This is probably the only time you will get to see inside the trans you are buying before you buy it. The inside is the most important part. The trans was NOT cleaned before I took the pics of it apart. It comes with the clutch fork, stock shifter, a good throwout bearing, all switches, a s-13 speed sensor, and has been re-sealed. SOLD! Last edited by racepar1; 11-19-2008 at 10:54 AM..

11-16-2008, 03:48 PM	#4
brett-hancock Leaky Injector Join Date: Jun 2008 Location: WFO Motorsports - WAKU WAKU SAN!!! Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Bout how many miles are on it???

11-16-2008, 03:52 PM	#5
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	It has about 180k on it, but I am almost certain it has been re-built. I see paint markings all over the place inside the trans that were not in the donor trans that I stole the shift forks and rods from. No grinding or weird noises at all in the 4 years I was using it for.

11-16-2008, 04:47 PM	#6
Wookie384 Zilvia Addict Join Date: May 2007 Location: N. Hollywood / Burbank Age: 40 Posts: 766 Trader Rating: (10) Rides Gallery: Wookie384 Feedback Score: 10 reviews	I've driven his car when this transmisson was installed and it as smooth as a hot knife through butter. Someone buy it...

11-16-2008, 04:58 PM	#7
24096 Zilvia Junkie Join Date: Feb 2008 Location: Southern California Posts: 344 Trader Rating: (1) Feedback Score: 1 reviews	so you took the old fork off of the other trans and put it on this one? so its not a new fork... hmmmm i might be interested in purchasing this...

11-16-2008, 05:04 PM	#8
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	I replaced all the shift forks and rods with a set from another trans that shifted and drove fine, it just had a grinding noise on decel in the donor trans. When I pulled THIS trans out of the car it wouldn't go into 5th or reverse and it was hard to get into 3rd and 4th. It now shifts like butter.

11-16-2008, 05:09 PM	#9
Screenname Zilvia Member Join Date: May 2008 Location: California Posts: 260 Trader Rating: (5) Feedback Score: 5 reviews	Bump for Aron and a good deal on a trans. Might have to get this just in case I blow my tranny doing stupid stuff, haha.

11-17-2008, 08:18 AM	#11
jbretz Zilvia Addict Join Date: Oct 2008 Location: Jersey Posts: 754 Trader Rating: (6) Feedback Score: 6 reviews	man than thing is mint too bad your in cali. i woulda bought this in a heartbeat. gl on the sale

11-18-2008, 09:42 AM	#12
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Bump #1 msglngth

11-18-2008, 10:06 AM	#13
Oo_Skyline_oO BANNED Join Date: Feb 2008 Location: Santa Ana, CA Posts: 639 Trader Rating: (6) Feedback Score: 6 reviews	what condition is the throw out bearing??? can you take 150 withought fork and shifter?? where are you located??

11-18-2008, 11:52 AM	#15
SochBAT Post Whore! Join Date: Dec 2004 Location: Abilene, TX Age: 39 Posts: 6,428 Trader Rating: (9) Rides Gallery: SochBAT Feedback Score: 9 reviews	Thats a damn good deal. I just frankensteined my tranny SR w/ KA bellhousing, and i didn't get it as remotely clean as yours. Shit. How much degreaser did you use?!?!

11-18-2008, 02:49 PM	#16
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	I cleaned the case in a solvent tank while it was apart. you would have to use a lot of simple green and scrub the hell out of it to get it this clean with degreaser and a pressure washer.