Anyone running wide fenders with JDM AERO? (s14) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Witness · 02-14-2009, 03:23 PM

I know it may be a dumb question, but i was curious if anyone has done this before. I want to run some wide rims but i don't want the stupid fender rolled look and i don't want to get a body kit that will crack over time and hang super low.

So have any of you seen a s14 kouki with jdm aero all around with wide fenders front and back?
or is the front and rear bumper not wide enough for it to look right?

joefresh · 02-14-2009, 04:15 PM

maybe have the fenders done professionally so they look good and not super flared?
oem aero is not aggressive enough for wide fenders/wheel setup imo.

projectRDM · 02-14-2009, 04:19 PM

As far as looks, it doesn't flow well, but the parts fit fine. You're assuming the entire fender is wider, which isn't the case, only the wheel well portion and the surrounding area is wider.

dirtdiggler666 · 02-14-2009, 05:42 PM

yes i would also like to see a kouki with jdm aero with wide f&r fenders

Rapier46 · 02-14-2009, 06:42 PM

Quote:

Originally Posted by projectRDM

As far as looks, it doesn't flow well, but the parts fit fine. You're assuming the entire fender is wider, which isn't the case, only the wheel well portion and the surrounding area is wider.

is this so on s13 aero also? only some? only the wheel part is wider and it goes back to regular width where it meets bumpers/side skirts?

LongGrain · 02-14-2009, 07:13 PM

yes

msglngth

Witness · 02-14-2009, 07:23 PM

Quote:

Originally Posted by joefresh

maybe have the fenders done professionally so they look good and not super flared?
oem aero is not aggressive enough for wide fenders/wheel setup imo.

I rather not roll the fenders if i do i want it as little as possible imo it looks ugly...
Anyone know what the widest wheels you can put with out needing a roll? will 9.5 in the rear clear?

That's the minimum width i want to have

OptionZero · 02-14-2009, 07:37 PM

have you seen how wide fenders look? they bulge out at the wheel well as RDM described and similar to how PULLED FENDERS LOOK

oh wait, you don't even want rolled fenders cuz they're ugly? ROLLED FENDERS ARE INVISIBLE, the fender lip that is "rolled" is on the INSIDE

fuck, stop being a pussy

if u want the fitment, do the work

drftwerks · 02-14-2009, 07:43 PM

vertex fenders look good.

Witness · 02-14-2009, 08:09 PM

Quote:

Originally Posted by OptionZero

have you seen how wide fenders look? they bulge out at the wheel well as RDM described and similar to how PULLED FENDERS LOOK

oh wait, you don't even want rolled fenders cuz they're ugly? ROLLED FENDERS ARE INVISIBLE, the fender lip that is "rolled" is on the INSIDE

fuck, stop being a pussy

if u want the fitment, do the work

lol well i didnt know it wasnt visible i just mostly seen pictures of the ones where it looks like the car has huge as fender flares.

But thanks guess ill just stay throw out that WF idea out.

florante rea · 02-14-2009, 09:01 PM

check kognition's track car!!

Marcus · 02-15-2009, 02:14 AM

i too wanna see jdm aero with overs/wide fronts. NOW

Koopa Troopa · 02-15-2009, 02:59 AM

I had +30mm CWest fenders on my S14 zenki and I pulled the rears rougly 20mm..

Chernobyl · 02-15-2009, 09:42 AM

^ why did you have to pull the rears to run +30 offset wheels?

*kognition* · 02-15-2009, 09:46 AM

I should have this kit finished and available early April. Just slowed down with race wing production right now.

Quote:

Originally Posted by florante rea

check kognition's track car!!

Quail · 02-15-2009, 09:59 AM

Quote:

Originally Posted by Witness

I want to run some wide rims but i don't want the stupid fender rolled look

Yes because this looks so stupid. Extra 40mm over standard. Mine has a roll and subtle flare/pull. You can barely notice its there.

Thats 18x10 +0 btw.

Johny5 · 02-15-2009, 11:32 AM

that does look a tad igmo with those tires man

Quail · 02-15-2009, 12:11 PM

I'm talking about the fenders not the tyres

Koopa Troopa · 02-15-2009, 04:08 PM

Quote:

Originally Posted by Chernobyl

^ why did you have to pull the rears to run +30 offset wheels?

Because I wasn't running +30 offset wheels.

I was planning on running 17x10 +18 RPF1 with 255 NT01's on all 4.

Witness · 02-17-2009, 01:08 PM

Well i ran into this by accident on here
but it doesn't have wide front fenders,
posting it for those who are also curious

tacotacotaco · 02-17-2009, 08:17 PM

you can try to replicate this type of roll to better suit you

02-14-2009, 03:23 PM	#1
Witness Zilvia Addict Join Date: Jul 2008 Location: CA Age: 34 Posts: 637 Trader Rating: (8) Feedback Score: 8 reviews	Anyone running wide fenders with JDM AERO? (s14) I know it may be a dumb question, but i was curious if anyone has done this before. I want to run some wide rims but i don't want the stupid fender rolled look and i don't want to get a body kit that will crack over time and hang super low. So have any of you seen a s14 kouki with jdm aero all around with wide fenders front and back? or is the front and rear bumper not wide enough for it to look right?

02-14-2009, 04:19 PM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	As far as looks, it doesn't flow well, but the parts fit fine. You're assuming the entire fender is wider, which isn't the case, only the wheel well portion and the surrounding area is wider. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

02-14-2009, 05:42 PM	#4
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 45 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	yes i would also like to see a kouki with jdm aero with wide f&r fenders __________________

02-14-2009, 07:43 PM	#9
drftwerks Nissanaholic! Join Date: Mar 2004 Location: california Posts: 2,343 Trader Rating: (1) Feedback Score: 1 reviews	vertex fenders look good. __________________ giantroboteyes.wordpress.com/

02-14-2009, 09:01 PM	#11
florante rea Zilvia FREAK! Join Date: Jan 2003 Location: king of prussia, pa Age: 44 Posts: 1,448 Trader Rating: (43) Feedback Score: 43 reviews	check kognition's track car!! __________________ fdrea

02-14-2009, 04:15 PM	#2
joefresh Zilvia Junkie Join Date: May 2007 Location: socal Posts: 451 Trader Rating: (11) Feedback Score: 11 reviews	maybe have the fenders done professionally so they look good and not super flared? oem aero is not aggressive enough for wide fenders/wheel setup imo.

02-14-2009, 07:13 PM	#6
LongGrain Post Whore! Join Date: Sep 2006 Location: Midwest Posts: 2,741 Trader Rating: (5) Feedback Score: 5 reviews	yes msglngth

02-14-2009, 07:37 PM	#8
OptionZero Post Whore! Join Date: Jul 2003 Location: Norcal Age: 41 Posts: 6,263 Trader Rating: (2) Rides Gallery: OptionZero Feedback Score: 2 reviews	have you seen how wide fenders look? they bulge out at the wheel well as RDM described and similar to how PULLED FENDERS LOOK oh wait, you don't even want rolled fenders cuz they're ugly? ROLLED FENDERS ARE INVISIBLE, the fender lip that is "rolled" is on the INSIDE fuck, stop being a pussy if u want the fitment, do the work

02-15-2009, 02:14 AM	#12
Marcus Nissanaholic! Join Date: Nov 2007 Location: San Diego Age: 37 Posts: 2,087 Trader Rating: (18) Feedback Score: 18 reviews	i too wanna see jdm aero with overs/wide fronts. NOW

02-15-2009, 02:59 AM	#13
Koopa Troopa Post Whore! Join Date: Sep 2006 Location: 北谷著, 沖縄県、日本 Posts: 2,565 Trader Rating: (3) Feedback Score: 3 reviews	I had +30mm CWest fenders on my S14 zenki and I pulled the rears rougly 20mm.. __________________ Buy my Stillway shifter!

02-15-2009, 09:42 AM	#14
Chernobyl Zilvia FREAK! Join Date: May 2003 Location: Denver, CO Age: 42 Posts: 1,563 Trader Rating: (6) Feedback Score: 6 reviews	^ why did you have to pull the rears to run +30 offset wheels?

02-15-2009, 11:32 AM	#17
Johny5 Post Whore! Join Date: Dec 2002 Location: Dallas, Tx Age: 40 Posts: 3,221 Trader Rating: (9) Feedback Score: 9 reviews	that does look a tad igmo with those tires man __________________ www.stewartleask.com

02-15-2009, 12:11 PM	#18
Quail Zilvia FREAK! Join Date: Jul 2007 Location: UK Age: 38 Posts: 1,378 Trader Rating: (1) Feedback Score: 1 reviews	I'm talking about the fenders not the tyres __________________

02-17-2009, 01:08 PM	#20
Witness Zilvia Addict Join Date: Jul 2008 Location: CA Age: 34 Posts: 637 Trader Rating: (8) Feedback Score: 8 reviews	Well i ran into this by accident on here but it doesn't have wide front fenders, posting it for those who are also curious

02-17-2009, 08:17 PM	#21
tacotacotaco Post Whore! Join Date: Jun 2005 Location: GRRRVINE!!! Age: 42 Posts: 3,249 Trader Rating: (16) Rides Gallery: tacotacotaco Feedback Score: 16 reviews	you can try to replicate this type of roll to better suit you