Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 08-22-2007, 01:01 AM   #1
LongGrain
Post Whore!
 
LongGrain's Avatar
 
Join Date: Sep 2006
Location: Midwest
Posts: 2,741
Trader Rating: (5)
LongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfection
Feedback Score: 5 reviews
stanza ka24e ecu in 240sx?

ok, i might be buying a chipped stanza ecu. i just want to know if i'll be able to use it on my 240sx KA24E, i know people use them, i was looking at threads on hybridka and ka-t, but i'll be honest, i didnt understand a lot of the lingo the guys on there were using, i dont know much about ecu's, ive never worked with one besides when i installed an AFC in my civic. for now i'd be running the pre-set maps (rev limit bumped to 7k, tuned maps, etc) until i finish gathering parts for my turbo kit, when i will reprogram the chip. any helps is appreciated!
LongGrain is offline   Reply With Quote
Sponsored Links
Old 08-22-2007, 01:22 AM   #2
e1_griego
Post Whore!
 
e1_griego's Avatar
 
Join Date: Sep 2004
Location: Independence, Ore.
Age: 40
Posts: 2,722
Trader Rating: (24)
e1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond reputee1_griego has a reputation beyond repute
Feedback Score: 24 reviews
Yup, it'll work fine. The only reason to run one, however, is if you intend to buy the consult cable or connector that lets you utilize the factory consult capabilities of the stanza ecu. There's really no point to use it, otherwise. Also, the address files for the u12 are different from the s13 fyi.

Alex
e1_griego is offline   Reply With Quote
Old 08-22-2007, 12:11 PM   #3
LongGrain
Post Whore!
 
LongGrain's Avatar
 
Join Date: Sep 2006
Location: Midwest
Posts: 2,741
Trader Rating: (5)
LongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfection
Feedback Score: 5 reviews
Quote:
Originally Posted by e1_griego View Post
Yup, it'll work fine. The only reason to run one, however, is if you intend to buy the consult cable or connector that lets you utilize the factory consult capabilities of the stanza ecu. There's really no point to use it, otherwise. Also, the address files for the u12 are different from the s13 fyi.

Alex
i dont know what consult is? and i also dont know what the address files for the U12 means either. its a reprogrammable chipped ecu. its tuned right now to add 10hp to a stock KA, changed timing, a/f maps etc, and raised rev limiter. i plan to run this map until i finish turboing and then reprogram it. should i buy it? or should i buy the one for the 240sx KA24E. what are the advantages/disadvantages. does the stanza ECU have the same maps as the 240? plug and play?
LongGrain is offline   Reply With Quote
Old 08-22-2007, 05:55 PM   #4
LongGrain
Post Whore!
 
LongGrain's Avatar
 
Join Date: Sep 2006
Location: Midwest
Posts: 2,741
Trader Rating: (5)
LongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfectionLongGrain is close to perfection
Feedback Score: 5 reviews
BUMP! help please!
LongGrain is offline   Reply With Quote
Old 03-22-2009, 12:21 AM   #5
Fonix36
Nissanaholic!
 
Fonix36's Avatar
 
Join Date: Mar 2008
Location: southern cali
Age: 35
Posts: 2,457
Trader Rating: (34)
Fonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really nice
Feedback Score: 34 reviews
Send a message via AIM to Fonix36 Send a message via Yahoo to Fonix36
old question but im doing my research and i also would like to know
soo bump
__________________

DRiFT 4 A Cure!
Fonix36 is offline   Reply With Quote
Old 03-22-2009, 12:45 AM   #6
awesomenick
Zilvia Addict
 
awesomenick's Avatar
 
Join Date: May 2006
Location: UT
Age: 36
Posts: 945
Trader Rating: (33)
awesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfectionawesomenick is close to perfection
Feedback Score: 33 reviews
I always thought you could do it, and just needed the Stanza MAFS? I could be confusing it with something else.
awesomenick is offline   Reply With Quote
Old 03-22-2009, 12:58 AM   #7
Fonix36
Nissanaholic!
 
Fonix36's Avatar
 
Join Date: Mar 2008
Location: southern cali
Age: 35
Posts: 2,457
Trader Rating: (34)
Fonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really niceFonix36 is just really nice
Feedback Score: 34 reviews
Send a message via AIM to Fonix36 Send a message via Yahoo to Fonix36
ive been reading alot and have kinda figured it out.... the thing is i want to chip my ka-e and fix the stupid cut out problem it has...
__________________

DRiFT 4 A Cure!
Fonix36 is offline   Reply With Quote
Reply

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net